Interprime 820
2Pages

{{requestButtons}}

Catalog excerpts

Interprime 820 - 1

Interprime 820 High Performance Epoxy Primer Interprime 820 is a high performance two-component epoxy- amine primer and one of the very key products in International’s Professional Paint Systems. Interprime 820 is specially formulated to suit the requirements of an anticorrosive holding primer as well as a sealer primer. This makes it ideal for use on both new build construction and repair jobs. This High Performance Epoxy Primer has been widely used in European yards over the last decade. Its popularity also extends to North American yards. Due to its success, Interprime 820 is now available world-wide. Interprime 820 has proven most popular among a variety of high profile Superyacht builders around Europe. One of the reasons for this is its ‘easy sanding’ attribute, which allows for high quality results to be achieved faster. Product features include: • Excellent anticorrosive protection • Superb adhesion to High Performance Fairing Compounds such as Interfill 830 • Suitable as a holding primer to steel and aluminium • Fully compatible with International’s Interspray Solvents, Thinner 900 series • Available in two colours for easy overcoating identification Interprime 820 can be used on rigid wood and is also suitable as a surface primer for gelcoat/composite. Together with a tie coat such as Interprotect and a high performing International antifouling, Interprime 820 will provide the ultimate protection scheme for the hull. For further details on International’s professional schemes refer to the Interspray Application Manual or your local sales representative. SYSTEMS AND COMPATIBILITY Can be applied direct to metal substrates, Interfill Epoxy fairing compounds and aged epoxy primers in good condition. PRODUCT DATA Product Code and Colour: YPA828 base – white, YPA829 base – grey, YPA824 Curing Agent Dry times: Refer to Interprime 820 Product Datasheet for specific details. Pot life: 4hrs @ 23°C Application method: Airless Spray, Airmix, Conventional Spray and Brush or Roller. Thinner/ Cleaner: Thin using YTA900 series thinners. Refer to Product Datasheet. Application temperature: Minimum 10°C (50°F), Maximum 35°C (95°F). Pack Size: 20lt (15l) and 5lt (3.75l) base, 5lt and 2.5lt (1.25l) curing agent. Note: Total fill volume (mixed) is 20 and 5 litres respectively.

Open the catalog to page 1
Interprime 820 - 2

SURFACE PREPARATION AND SYSTEM Steel: Thoroughly degrease with Yacht Line Super Cleaner. Gritblast to Sa 2½ - near white metal surface. If gritblasting is not possible, grind the metal surface with 24 – 36 grit abrasive discs to a uniform, clean, bright metal surface. Aluminium: Thoroughly degrease with Yacht Line Super Cleaner. Blast with aluminium oxide or copper-free equivalent. If blasting is not possible, disc with 24 – 36 grade aluminium oxide paper to a uniform, clean , bright metal surface. Epoxy fillers: Sand with 60 – 120 grade paper. Remove all blasting/sanding residues. Epoxy...

Open the catalog to page 2

All International Yacht Paint catalogs and brochures

  1. Interprotect

    2 Pages

  2. Cruiser 200

    2 Pages

  3. Watertite

    2 Pages

  4. Original

    2 Pages

  5. Trilux 33

    2 Pages

  6. VC 17m Extra

    2 Pages

  7. Interdeck

    2 Pages

  8. Danboline

    2 Pages

  9. Yacht Primer

    2 Pages

  10. Woodskin

    2 Pages

  11. Compass

    2 Pages

  12. Schooner

    2 Pages

  13. Pre-Kote

    2 Pages

  14. Thinner No.7

    1 Pages

  15. VC Tar2

    2 Pages

  16. Primocon

    2 Pages

  17. Perfection

    2 Pages

  18. Toplac

    2 Pages

  19. Micron Extra

    2 Pages

  20. Micron 66

    2 Pages