TNF Ceilings C55 & C65
8Pages

{{requestButtons}}

Catalog excerpts

TNF Ceilings C55 & C65 - 1

Interiors by INEXA Craftsmen to the world´s finest ships

Open the catalog to page 1
TNF Ceilings C55 & C65 - 2

TNF ceilings C55 & C65 The C65 Ceiling panels with steel on both sides are rigid enough to carry ventilation unit, without support - no hangers required. The C55 Ceiling panels cannot carry accessories such as luminaries, diffusers etc. which have to be individually suspended from the deck head by means of hangers. TNF C65 ceiling is a high load selfsupporter. Max. load without suspension: 25 kg - at a span of 3000 mm Light fixture installed in a TNF C65 ceiling panel. Suspension by hangers is not necessary. Max. hole size: 425 x 425 mm in the 600 mm wide panel. Ceiling dimension Ceilings...

Open the catalog to page 2
TNF Ceilings C55 & C65 - 3

Installation Standard procedure When installing the TNF ceilings, the following procedure should be used: 1. Start the installation with a ceiling panel which turns the c-part of the joint towards the top profile. enough space for that operation, the cut panel should be installed before the panel next to it. 4. After the ceiling panels have been installed on the top profile flanges and correctly positioned, they should be fastened to the flanges by means of two steel pop rivets at both ends. The rivets to be positioned 100 mm apart. 5. Install the corner caps, TNF 607 and TNF 608 and the...

Open the catalog to page 3
TNF Ceilings C55 & C65 - 4

Installation details Installing Hangers Upper part welded to deck head Lower part with TNF accessories placed into position Installing T-carriers Splice The lengths of the ceiling panels equal the interior distance between the two walls less 10 mm. When free span exceeds 3000 mm the ceiling panel must be jointed by the T-carrier TNF 639 suspended from the deck head. The T-carrier is installed after the top profiles are positioned by suspension from the deck head by means of hangers at 1200 mm distance. The flange of the T-carrier has to be leveled with the flange of the top profiles. The...

Open the catalog to page 4
TNF Ceilings C55 & C65 - 5

Ceiling features Ceiling panel joint The ceiling panels are hooked together by the i/c part, while the tongue and groove design locks the panels into position and ensures a flat, leveled ceiling surface. i-part with tongue Easy and quick installation The design of the ceiling panel joint makes the installation easy and fast and allows each individual ceiling panel to be demounted as illustrated. Fire integrity maintained As the ceiling panels are fully insulated, the fire integrity will not be affected when the ceiling panels are demounted and re-installed. Demountability By pressing the...

Open the catalog to page 5
TNF Ceilings C55 & C65 - 6

TNF inspection hatches TNF 681 Clear opening: 220 X 220 mm Standard assortment Inspection and access hatches are supplied as units, ready to be installed as an integrated part of the TNF ceiling. The hatches are supplied in colours to match the ceiling surface. Installation TNF 682 Clear opening: 220 X 330 mm TNF hanger Ceiling panel b Hatch leaf Locking device Hatch frame Hatch sizes: a. Total width/length b. Cut out in panel c. Clear opening Outer dimension Clear opening Installation instruction To be fitted within a single panel before installing in ceiling Same installation procedure as...

Open the catalog to page 6
TNF Ceilings C55 & C65 - 7

TNF ceiling quality features The surface finish has a built-in extra advantage with the special MAGIC coating which contains no halogens, no toxic fumes and gives a minimum flame spread. The ceilings are also available with a surface of stainless steel. Fire Class: MAGIC Surface For extra protection during handling and installation the ceiling panels carry a peeloff film. IMO Standard The TNF ceiling complies with SOLAS safety regulations and is approved by all major authorities and classification societies. · Each ceiling panel is fully insulated. · No extra insulation is necessary....

Open the catalog to page 7
TNF Ceilings C55 & C65 - 8

TNF is the complete high quality accommodation system for all marine interiors. The TNF system includes wall and ceiling panels, doors, floors, wetunits, furniture and prefabricated cabins. TNF has been leading the development in marine interiors since 1973. The world famous TNF quality is demonstrated in the environment, which can be designed to provide the ideal The Original Marine Accommodation System Craftsmen to the world's finest ships and offshore units www.inexa.com info@i

Open the catalog to page 8

All INEXA A/S catalogs and brochures

  1. TNF-General

    4 Pages

  2. TNF-Magic

    12 Pages