Superior receiver performance The IC-M603 has excellent receive specifications* which allow a weak signal a better chance of being heard when louder signals are around it. The powerful audio output from the front facing large speaker further increases the audibility and quality of re- ceived calls. * More than 75dB for intermodulation rejection, spurious response and adjacent channel selectivity and -5dBu emf (typical) high sensitivity. Large LCD with dot-matrix characters The large full dot-matrix display is designed for optimum read- ability in any lighting condition. With the extra large font,...

IJ»JL marni Front and rear panel microphone connection detached from the front panel and panel without any modification. phone extension cable, OPC- Transparent installation Image The RX speaker function, "receiver-repeater" allows you to monitor the received radio audio from a hailer horn on the deck or tower. You can also make an announcement on- board from the microphone. Favorite channel function This function allows quicker channel selection. Set the "TAG" channel to the channels used most often. When pushing the up/down buttons on the speaker microphone, only tagged chan- nels are selected...

• Usable channels : INT and USA* channels • Power supply requirement: • Operating temperature range : (WxHxD; projections are not included) • NMEA formats • Output power • Frequency error • Spurious emissions • Residual modulation • Squelch sensitivity • Adjacent channel • Spurious response • Audio output power 0% distortion with a 4Q load) Measurements made in accordance with EN 301 025. All stated specifications are subject to change without notice or obligation. Supplied accessories: • Hand microphone • DC power cable Some options may not be available in some countries. Please ask your dealer...