DOC M802 - Icom France - #1

Text version of the page

MF/HF MARINE TRANSCEIVER Standard 4 × 8 remote controller The IC-M802 offers an industry-standard 4-inch tall (10.16 cm) remote controller. When set up with the IC-M502 VHF radio, Icom offers you a complete communications station. Large LCD with dot matrix characters You can easily read the alphanumeric name of any of the 1355 ITU channels at a glance with the large LCD display. Nighttime operation is no problem with 10 levels (plus OFF) adjustable backlit display and keypad. Easy to use in all conditions The IC-M802 offers two large dials – bank and channel – for easy channel selection. Up to 16 banks of 20 (max.) each for user channels, and 17 banks for ITU channels are available. Built-in digital selective calling For added safety at sea, the IC-M802 offers the latest in one-touch DSC emergency communications technology. (ITU Class E standard.) The emergency button is covered by a red, spring loaded hatch to avoid accidental DSC activation. Digital signal processor advantage The speech compressor, utilizing DSP, increases average talk power. Flexible filter settings provide for narrow band signals like E-mail, SITOR, FSK and other operation without an optional filter. 150W (PEP) of powerful output 150 Watts of power offers superior worldwide communications. A one piece, die cast aluminum chassis and a large cooling fan allow continuous transmission at full output power – very important for data communications, like e-mail. One-touch e-mail access An SSB first! The IC-M802 can be set to memorize your HF e-mail access frequency, mode and bandwidth settings. At sea e-mail has never been easier. * Please consult with an HF e-mail provider for details. Automatic antenna tuner, AT-140 An optional automatic antenna tuner, AT-140, easily connects to the IC-M802. When the tuner cannot tune the antenna, the IC-M802 bypasses the tuner and displays a warning indicator on the LCD. Other features • Wide band receive coverage (0.5 – 29.9999MHz) • VFO mode is available (depending on version) • Remote control mic allows you to select channels directly • Accessory RS-232C port allows connection of modem, etc. • GPS input, NMEA 0183 version 2.0 or later • A headphone jack in front of the controller The latest ICOM Digital Signal Processor technology with a compact remote head