| | | Technical specification's Hydrotrans SW50 Introduction The Hydrotrans hydraulic boattrailer is designed to launch and recover boats manufacturer on a slipway, transport the boats over land and park them in a storage area. The Hydrotrans SW can be pulled by a reach truck or a agricultural tractor. It uses the hydraulic facility of the pulling device for all the hydraulic functions. The boat is lifted by 6 hydraulic pads for boats with soft pads on them to avoid damaging the hull. The front of the boat is supported by the crossbeam with also a soft pad on it to avoid damage. For sailboat sailboats a adaptor is available. The width of the trailer for boat frame and the height are hydraulic adjustable. The pads and drawbar are hydraulic adjustable. The Hydrotrans SW50 is also suitable for transporting boats on T-cradle's. Because off the solid tires the SW50 offers optimal comfort through any terrain capable of carrying the load. A further advantage of the SW50 is that not every boat needs to be placed on a cradle. Many boats can be placed on studs. This offers you a chance to save a lot off money on storage material. Technical specification's Capacity, 50.000 kg Frame, open U-designed frame with adjustable width, height and length. Wheels, 16 solid tires. Drawbar, 4,0 mtr. extendable. Pads, 6 polyurethane pads 930x320 mm. | | |
| | | Dimensions Height on pads, 935 mm. Height on front, 470 mm. Distance between centre of pads, 1580-3080 mm. Lifting height frame, 500 mm. Lifting height pads, 450 mm. | | |