HydroHoist Catalogue 2009
20Pages

{{requestButtons}}

Catalog excerpts

HydroHoist Catalogue 2009 - 1

BOAT LIFTS America's #1 Choice for Boat Lifts & Accessories

Open the catalog to page 1
HydroHoist Catalogue 2009 - 2

UitraLiftî Seríes Featuring "all steel above the water" and the only polyethylene tank designed and manufactured exclusively for use in boat lifts. UitraLiftî Series Shallow Water" Shallow Water Lift incorporates a longer polyethylene tank with a lower profile to allow for operation in as little as 3 feet of water. For floating docks and boats UitraLiftî Series Front Mount " Innovative front-mount installation design to accommodate double-size slips and L-shaped moorings. For floating Provides mooring in almost every type of dock, and the capability to lift almost any powerboat or sailboat....

Open the catalog to page 2
HydroHoist Catalogue 2009 - 3

YOUR BOAT IS SECURELY DRY-DOCKED, ITS HULL AND OUT-DRIVE SAFELY PROTECTED FROM WIND AND WAKE DAMAGE, ALGAE AND MARINE GROWTHS THAT COMPROMISE YOUR BOAT'S PERFORMANCE, VALUE AND APPEARANCE. WITH THE FLIP OF A SWITCH, LAUNCH OR DRY-DOCK YOUR BOAT NO MORE TRAILERING. NO MORE BOAT RAMPS. NO MORE HULL CLEANING. LEAVE YOUR BOAT FOR AN HOUR OR A YEAR, WITH CONFIDENCE THAT IT WILL REMAIN SECURELY DRY-DOCKED. SINCE 1965, EACH HYDROHOIST IS ENGINEERED TO EXACTING STANDARDS AND THE HIGHEST QUALITY LEVELS TO ENSURE PERFORMANCE AND RELIABILITY.

Open the catalog to page 3
HydroHoist Catalogue 2009 - 4

The UltraLift2™ is the latest in HydroHoist's ultra-successful line of boat-lifting products. Our boat lifts are manufactured with polyethylene tanks designed specifically for the marine environment- modeled, molded and shaped for seamless efficiency and safety. Another unique feature is the patented UltraGrip™ tank connection, which enables the Ultra Lift2™ to be installed with all steel parts above water.* This innovative concept protects your boat lift against rust and marine growth for years of convenient 'Standard installation

Open the catalog to page 4
HydroHoist Catalogue 2009 - 5

UltraGrip™ High-Strength Low Alloy (HSLA) casting with precision injection molded polyethylene bushings Patented HSLA weldable steel cast dock bracket Custom-molded polyethylene tanks HSLA cast arm end 5” high-density polyethylene square-hole bushings are highly resistant to impact or low-water damage. If stressed, the tanks flex and then return to their original shape. Standard Features Recommended for • Heavy-duty construction • Boats up to 8,800 lbs. • Drive-in or back-in installations • Precision-designed, custom-molded, high-impact polyethylene tanks • Boats up to 28' overall length •...

Open the catalog to page 5
HydroHoist Catalogue 2009 - 6

manufactured by HydroHoist—are highly resistant to impact or low-water damage. Flexing when stressed, the tanks then return unharmed to their original shape! And, all the steel parts are above the water—a completely new concept in the boat lifting industry—to defy rust, corrosion, and the elements, and protecting your boat for years of convenient and care-free storage. The Ultral_ift2™—the ultimate in boat lift performance.

Open the catalog to page 6
HydroHoist Catalogue 2009 - 7

HSLA casting with precision injection molded polyethylene bushings HSLA cast arm end HSLA weldable steel cast dock bracket Custom-molded polyethylene tanks are highly resistant to impact or low-water damage. If stressed, the tanks flex and then return to their original shape. 5” high-density polyethylene square-hole bushings Standard Features Recommended for • Heavy-duty construction • Precision-designed, custommolded, high-impact polyethylene tanks • All steel parts above water* • Hot-dip, zinc-galvanized structural steel frame and fasteners • Full-width 5" frame channel with 5" adjustable...

Open the catalog to page 7
HydroHoist Catalogue 2009 - 8

The Shallow Water Lift™ incorporates a longer polyethylene tank with a lower profile to allow for operation in water depth of at least 3 feet. Constructed of durable polyethylene that is impact and puncture resistant. Similar in design to the UltraLift2™, the Shallow Water Lift has been engineered to keep the galvanized steel components on the top side of the tank, minimizing corrosion and maximizing the life of your lift. The Shallow Water Lift™ by HydroHoist is yet another product in our expertly engineered product line to ensure a hassle free and enjoyable boating experience. ALOG...

Open the catalog to page 8
HydroHoist Catalogue 2009 - 9

UltraGrip™ HSLA casting with precision injection molded polyethylene bushings Patented 5” high-density polyethylene square-hole bushings HSLA cast arm end HSLA weldable steel cast dock bracket Custom-molded polyethylene tanks Bracket shown with HydroGuard are highly resistant to impact or low-water damage. If stressed, the tanks flex and then return to their original shape. Standard Features Recommended for • 5,000 lbs. capacity • Boats up to 5,000 lbs. • Drive-in installation • 10 ft. slip minimum • Boats up to 28' overall length • Low profile molded polyethylene tanks • Inboard or stern...

Open the catalog to page 9
HydroHoist Catalogue 2009 - 10

Proni: PJoimi HydroHoist's Front Mount™ boat lifts allow plenty of room in the boat slip for personal watercrafts, a fishing skiff and even a place to wet a fishing line. Our Front Mount™ models are designed for double-berth slips and L-shaped moorings. 'Standard installation

Open the catalog to page 10
HydroHoist Catalogue 2009 - 11

STANDARD FEATURES • Ultra-tough polyethylene • Hot-dipped, zinc-galvanized structural steel and fasteners • Superior marine-grade • Heavy-duty structural- grade dock brackets with molded bumper guards • Adjustable hull support • All cast parts are HSLA steel • Custom hull pads for specia • Custom mooring hardware • Boats up to 26' overall length • Floating docks TECHNICAL SPECS • Extra-wide slips • L-shaped moorings

Open the catalog to page 11
HydroHoist Catalogue 2009 - 12

HydroHoist Side-Tie™ B models provide mooring for powerboats and sailboats in floating or fixed docks. Floating walkways on each side offer a guide for the boat when down, a step out of the boat when moored and a step into the boat when the boat and lift are fully raised.

Open the catalog to page 12
HydroHoist Catalogue 2009 - 13

STANDARD FEATURES • Heavy-duty construction • Ultra-tough, marine- grade fiberglass tanks • Superior marine-grade • Heavy-duty mooring brackets • High-output air delivery system • Hot-dipped, zinc-galvanized structural steel and fasteners • All cast parts are HSLA stee • Boats up to 45' overall length • Fixed or Floating docks • Extra-wide slips • L-shaped moorings • Canal waterways TECHNICAL SPECS 20000 B 8 30000 B not shown. Units are custom-designed to boat specifications.

Open the catalog to page 13

All HydroHoist catalogs and brochures

  1. HarborHoist

    2 Pages

Archived catalogs

  1. UltraLift-2

    2 Pages