All HK Research corporation catalogues and brochures

P. 1

ProductData908 LENOIR ROAD • POST OFFICE BOX 1809HICKORY, NORTH CAROLINA • 28603-1809TELEPHONE (828) 328-1721TOLL FREE (800) 334-5975FAX (828) 328-4572LHB-8350 GRIZZLY™ BROWN VINYLESTER HYBRIDTOOLING GEL COATHigh Heat Distortion PointChemical...

P. 2

APPLICATIONHK Research Tooling Gel Coats are pre-promoted and thixotropic as supplied. These gel coats shouldbe applied only on properly prepared surfaces. All experienced mold makers understand that care in thepreparation of the plug or pattern is essential...

P. 3

MIXINGPrior to removal from the shipping container and catalyzation, it is recommended that the materials bemixed thoroughly to reincorporate any settled or stratified material. It is further recommended that thematerial in the shipping container be mixed...

P. 1

ProductData908 LENOIR ROAD • POST OFFICE BOX 1809HICKORY, NORTH CAROLINA • 28603-1809TELEPHONE (828) 328-1721TOLL FREE (800) 334-5975FAX (828) 328-4572LHB-3350 GRIZZLY™ BLACK VINYLESTER HYBRIDTOOLING GEL COATHigh Heat Distortion PointChemical...

P. 2

APPLICATIONHK Research Tooling Gel Coats are pre-promoted and thixotropic as supplied. These gel coats shouldbe applied only on properly prepared surfaces. All experienced mold makers understand that care in thepreparation of the plug or pattern is essential...

P. 3

MIXINGPrior to removal from the shipping container and catalyzation, it is recommended that the materials bemixed thoroughly to reincorporate any settled or stratified material. It is further recommended that thematerial in the shipping container be mixed...

P. 1

ProductData908 LENOIR ROAD • POST OFFICE BOX 1809HICKORY, NORTH CAROLINA • 28603-1809TELEPHONE (828) 328-1721TOLL FREE (800) 334-5975FAX (828) 328-4572B-1800CLEAR VINYLESTER HYBRIDTOOLING GEL COATHK Research Corporation's Tooling Gel Coats...

P. 2

A suggested starting formula for making a metal-filled tooling gel coat could be as follows:B-1800 ClearAluminum Powder75-80 Parts by Weight20-25 Parts by WeightThe aluminum powder should be added gradually to the clear gel coat while mixing and mixingcontinued...

P. 3

The "several passes" technique will keep air entrapment at a minimum and result in a "pin hole andporosity free" film. A film thickness of 20-25 mils should be applied in order to obtain maximummold life. HK Research Tooling Gel Coats are formulated to...

P. 4

SAFETY CONSIDERATIONSHK Research Tooling Gel Coats are based on a resin system, which contains styrene monomer,which is a flammable liquid. Keep away from sparks, heat and open flame (including pilot lights).Electrical equipment should be vapor-proof...

P. 1

ProductData908 LENOIR ROAD • POST OFFICE BOX 1809HICKORY, NORTH CAROLINA • 28603-1809TELEPHONE (828) 328-1721TOLL FREE (800) 334-5975FAX (828) 328-1721100% NPG/ISOPHTHALIC RESIN BACKBONELOW STYRENE (HAP) LEVEL - LESS THAN 33%FORMULATED INTO...

P. 2

TYPICAL PROPERTIES OF LIQUID DEEP-TONE GEL COATTotal HAP Content:Weight/Gallon @ 77oF:Specific Gravity @ 77oF:Viscosity, Brookfield@ 77oF @ 6 rpm:@ 60 rpm:Thixotropic Index:Gel Time, 100 Grams@ 77oF, 2% MEKP:Shelf Life Uncatalyzed, @ 77oF:< 33 %9.8-11.00...

P. 3

MIXINGPrior to removal from the shipping container and catalyzation, it is recommended that the materialsbe mixed thoroughly to reincorporate any "settled" or "stratified" material. It is furtherrecommended that the material in the shipping container...

P. 1

Product Data 908 LENOIR ROAD • POST OFFICE BOX 1809 HICKORY, NORTH CAROLINA • 28603-1809 TELEPHONE (828) 328-1721 rVcaa|»h TOLL FREE (800) 334-5975 riCOCdlOII FAX (828) 328-4572 CORPORATION MGH SERIES HydroShield7 HIGH...

P. 2

Typical properties of this family of High Performance Gel Coats are as follows: Weight/Gallon @ 77°F: Specific Gravity @ 77°F: Viscosity, Brookfield @ 77°F, 6 rpm: 60 rpm: Shelf Life @ 77°F: Uncatalyzed: Catalyzed,2%MEKP*: MGH...

P. 3

PERFORMANCE PROPERTIES Laboratory tests on FRP panels produced using the MGH Series gel coats have shown minimal color change and maximum gloss retention when exposed to QUV-B bulb weatherometer exposure. 100-Hour boiling water exposure tests...

P. 4

SAFETY CONSIDERATIONS MGH Series 100% NPG/Isophthalic gel coats are based on a resin, which contains styrene monomer, which is a flammable liquid. Keep away from sparks, heat and open flame (including pilot lights). Electrical equipment should...

P. 5

P. 1

Product Data 908 LENOIR ROAD • POST OFFICE BOX 1809 HICKORY, NORTH CAROLINA • 28603-1809 TELEPHONE (828) 328-1721 rVcaa|»h TOLL FREE (800) 334-5975 riCOCdlOII FAX (828) 328-4572 CORPORATION "MG" SERIES 100% NPG/ISOPHTHALIC MARINE...

P. 2

APPLICATION HK Research Corporation's "MG" Series 100% NPG/Isophthalic based gel coats are formulated for standard conventional spray application, as well as "air-less" application. These high performance gel coats require careful application...

P. 3

All equipment must be grounded - including spray guns and molds. Both the polyester gel coat and the catalyst may cause burns to eyes and skin. Do not get in the eyes! Avoid breathing vapors! Gel coat applicators should wear a NIOSH approved...

P. 1

Product Data CORPORATION LHM-3500 LOW HAP BLACK HydroShield® LITE NPG/ISO MARINE GEL COAT > LOW STYRENE (HAP) LEVEL - LESS THAN 32% > NPG/ISOPHTHALIC FOR EXCELLENT BLISTER RESISTANCE > EXCELLENT UV RESISTANCE >...

P. 2

TYPICAL PROPERTIES OF LIQUID GEL COAT LHM-3500 Weight/Gallon @77°F: Specific Gravity @ 77°F: Viscosity, Brookfield @ 77°F @ 6 rpm: @ 60 rpm: Thixotropic Index: Gel Time, 100 Grams @ 77°F, 2% MEKP: Shelf...

P. 3

HKR096-012502 DO NOT MIX MA TERIAL CONTINUOUSL Y!—As this may cause loss ofthixotropic properties. If the gel coat is inadvertently over-mixed, hold material for 4 hours without agitation before application. MIXING (continued) It...

P. 1

ProductData908 LENOIR ROAD • POST OFFICE BOX 1809HICKORY, NORTH CAROLINA • 28603-1809TELEPHONE (828) 328-1721TOLL FREE (800) 334-5975FAX (828) 328-4572LHM-2900LOW HAP WHITEHydroShield® LITENPG/ISO MARINE GEL COATLOW STYRENE (HAP) LEVEL...

P. 2

TYPICAL PROPERTIES OF LIQUID GEL COATLHM-2900Weight/Gallon @ 77oF:Specific Gravity @ 77oF:Viscosity, Brookfield@ 77oF @ 6 rpm:@ 60 rpm:Thixotropic Index:Gel Time, 100 Grams@ 77oF, 2% MEKP:Shelf Life Uncatalyzed, @ 77oF:11.00 pounds1.3218,000-20,000 cp.2,200-3,200...

P. 3

DO NOT MIX MATERIAL CONTINUOUSLY!---As this may cause loss of thixotropicproperties. If the gel coat is inadvertently over-mixed, hold material for 4 hours withoutagitation before application.MIXING(continued)It is suggested that the catalyst concentration...

P. 1

Product Data 908 LENOIR ROAD • POST OFFICE BOX 1809 HICKORY, NORTH CAROLINA • 28603-1809 TELEPHONE (828) 328-1721 rVcaa|»h TOLL FREE (800) 334-5975 riCOCdlOII FAX (828) 328-4572 CORPORATION MG-1615 SERIES 100%...

P. 2

TYPICAL PROPERTIES OF LIQUID GEL COAT Weight/Gallon @ 77°F: Specific Gravity @ 77°F: Viscosity, Brookfield @ 77°F @ 6 rpm : @ 60 rpm : Geltime, 100 Grams @ 77°F, 2% MEKP: Shelf Life - Uncatalyzed @ 77°F 8.7...

P. 3

Care must be taken to insure that the flake is well dispersed. If the flake is not well dispersed, lumps resulting in nozzle clogging will be evident. A Binks #18 gun with a 68PB air nozzle and 68 needle and a Devilbiss JGA or MBC gun with a 64D...

P. 4

APPENDIX I This 100% NPG-Isophthalic Clear Gel Coat is available in a wide range of gel times to fit the needs of various FRP fabricators. The following table lists these products and their corresponding gel times. PRODUCT ...

P. 1

Product Data CORPORATION LHM-1517 LOW HAP MARINE GEL COAT The LHM-1517 Clear Marine Gel Coat is based on HK's unique Acrylic Modified Hybrid Polymer backbone and is formulated to meet the need for high quality marine and general exterior...