HERNIS Flex
2Pages

{{requestButtons}}

Catalog excerpts

HERNIS Flex - 1

HERNIS CCTV Solutions HERNIS Flex HERNIS CCTV Control System HERNIS’ Flex IP CCTV system offers full flexibility and infrastructure across multiple transmission technologies, creating a sophisticated CCTV system limited only by your creativity. Flexible infrastructure Caters for CCTV systems of all sizes Flexible recording capabilities Equipment designed to meet extreme HERNIS Flex CCTV achieves a complete IP architecture or accepts analogue/serial signals if required. Systems are deliberately designed to maximize video quality and recording reliability. CCTV Systems designed on the HERNIS Flex architecture offer full flexibility in transmission. Straight forward small systems and large complex systems alike are engineered for control and transmission remotely and locally via Local Area Networks, satellite and radio link. CCTV performance criteria Can incorporate remote and local systems Integrates with third party telecommunications, alarms, hardware, The HERNIS Flex CCTV architecture, including the video and alarm management applications, utilize one common infrastructure provided by an Ethernet backbone, supervised by a system server. A complete turnkey system easily incorporates with third party telecommunications, alarms, hardware, software or DCS management and security systems. Straight forward connection to external low-voltage input/output devices (such as visual/ audible alarms, Passive Infrared Sensors (PIR), smoke, gas, flame detectors etc.) enables HERNIS Flex CCTV system to improve operator efficiency and reduce incident response time, significantly adding to the integrity of any system and safety of any facility. software or DCS management and security systems User profile priority scheme Complete system diagnostic software available Alarm Management software available Video wall application available HERNIS Flex CCTV Systems are designed and engineered for the following functional capabilities: • • • • Remote and local system transmission and control via Local Area Network, satellite and radio link Complete system diagnostics, down to each component Remote administration User friendly software that accesses many layers of information HERNIS Flex system camera stations are connected to a camera dedicated network via an integrated transmitter/receiver unit. The video signal from the IP camera station is encoded and streamed to a HERNIS Video Extender (HVE) that distributes video to a virtually unlimited number of operator stations. Eaton HERNIS Scan Systems AS cctv@eaton.com www.hernis.com BE096814C.docm, p 1/2 This document may be subject to change without further notice.

Open the catalog to page 1
HERNIS Flex - 2

HERNIS CCTV Solutions HERNIS Flex HERNIS CCTV Control System The HERNIS Flex CCTV architecture supports dual video streams from each camera in the system. The two video streams are independent meaning they can be set to transmit at different rates and with different quality to serve different purposes such as viewing, recording or analysis, or adapt to hardware or network limitations dictated by the circumstances on the location. Flexible infrastructure Remote and local systems High quality equipment proven for Authorized operators are able to control cameras, and monitor live as well as...

Open the catalog to page 2

All Hernis Scan Systems catalogs and brochures

  1. S9 HD IP

    1 Pages

  2. Hernis CCTV

    20 Pages

Archived catalogs