HEMPAGUARD X5 89700 - 2 Pages

Add to MyNauticExpo favorites
HEMPAGUARD X5 89700

Catalog excerpts

Product Data HEMPAGUARD X5 89700 89700: BASE 89709: CROSSLINKER 98980 Description: HEMPAGUARD X5 is an advanced fouling defence coating based on ActiGuard® technology which utilizes the added effect of advanced hydrogel silicone and an efficient fouling preventing biocide. This boosts the antifouling barrier and prolongs the fouling free period. HEMPAGUARD X5 therefore possesses a fairly high fuel saving potential. The product is suitable for vessels operating with service intervals up to 36 months and/or long idle periods (up to 60 days). HEMPAGUARD X5 is an advanced fouling defence coating with high solids content. The product is based on silicone, and cures after addition of CROSSLINKER 98980. For vessels with service speeds above 8 knots and activity higher than 50%. This product does not contain organotin compounds acting as biocides and complies with the International Convention on the Control of Harmful Antifouling Systems on Ships as adopted by IMO October 2001 (IMO document AFS/CONF/26). Part of Group Assortment. Local availability subject to confirmation. PHYSICAL CONSTANTS: Shade nos/Colours: Finish: Volume solids, %: Theoretical spreading rate: Flash point: Specific gravity: Dry to touch: Fully cured: VOC content: Shelf life: 59161/ Red Glossy 68 ± 1 4.5 m2/l [180.5 sq.ft./US gallon] - 150 micron/6 mils 28 °C [82.4 °F] 1 kg/litre [8.4 lbs/US gallon] 3 hour(s) , 20°C/68°F 7 day(s) , 20°C/68°F 273 g/l [2.3 lbs/US gallon] 2 years (25°C/77°F) for BASE and 1 year for CROSSLINKER (25°C/77°F) from time of production. Depending on storage conditions, mechanical stirring may be necessary before usage. The physical constants stated are nominal data according to the HEMPEL Group's approved formulas. APPLICATION DETAILS: Version, mixed product: Mixing ratio: Application method: Thinner (max.vol.): Pot life: Nozzle orifice: Nozzle pressure: Cleaning of tools: Indicated film thickness, dry: Indicated film thickness, wet: Overcoat interval, min: Overcoat interval, max: Safety: 89700 BASE 89709: CROSSLINKER 98980 17.8 : 2.2 by volume Airless spray / Brush/Roller (touch up), see REMARKS overleaf No thinning (see REMARKS overleaf) 1 hour(s) 20°C/68°F after addition of CROSSLINKER 0.019 - 0.021 " 150 bar [2175 psi] (Airless spray data are indicative and subject to adjustment) HEMPEL'S THINNER 08080 150 micron [6 mils] 225 micron [9 mils] According to specification. According to specification. Handle with care. Before and during use, observe all safety labels on packaging and paint containers, consult HEMPEL Safety Data Sheets and follow all local or national safety regulations. Product Data Sheet

 Open the catalog to page 1

HEMPAGUARD X5 89700 APPLICATION CONDITIONS: Apply only on a dry and clean surface with a temperature above the dew point to avoid condensation. In confined spaces provide adequate ventilation during application and drying. Use only where application and curing can proceed at temperatures above: 0°C/32°F. The temperature of the surface and that of the paint itself must also be above this limit. Curing requires a relative humidity of: minimum 30%, maximum 85%. The special application properties furthermore necessitate extra consideration as to possible windy weather. The on-site...

 Open the catalog to page 2

All Hempel catalogs and brochures

  1. PDS GLOBIC 9000

    2 Pages

  2. PDS GLOBIC 6000

    2 Pages

  3. HEMPADUR 15553

    2 Pages

  4. HEMPADUR 15590

    2 Pages

  5. HEMPADUR 35560

    2 Pages