All Hempel catalogues and brochures

P. 1

Product DataHEMPADUR 17630 /HEMPADUR 17633Medium-high temperature 17630 : BASE 17639 : CURING AGENT 97330low temperature 17633 : BASE 17639 : CURING AGENT 98420Description:HEMPADUR 17630/17633 is a two-component, high-build, polyamide adduct-cured epoxy...

P. 2

HEMPADUR 17630 17633SURFACE PREPARATION:New steel: Remove oil and grease etc. thoroughly with suitable detergent. Remove salts and othercontaminants by high pressure fresh water cleaning. Abrasive blasting to minimum Sa 2½ (ISO 85011:1988) with a...

P. 1

Product DataHEMPADUR 1557015570: BASE 15579: CURING AGENT 95570Description:HEMPADUR 15570 is a two component, polyamide-adduct cured epoxy paint, which cures to a strongand highly corrosion resistant coating, at temperatures down to -10°C/14°F....

P. 2

HEMPADUR 15570SURFACE PREPARATION:New steel: Abrasive blasting to Sa 2½ (ISO 8501-1:2007). For temporary protection, if required, use asuitable shopprimer. All damage of shopprimer and contamination from storage and fabrication shouldbe thoroughly...

P. 1

Product DataHEMPADUR 1550015500: BASE 15509: CURING AGENT 97580Description:HEMPADUR 15500 is a two-component, amine adduct cured phenolic epoxy (novolac) paint, whichcures to a coating with excellent resistance to a wide range of chemicals as tabulated...

P. 2

HEMPADUR 15500SURFACE PREPARATION:Steel: Remove oil and grease etc. thoroughly with suitable detergent. Remove salts and othercontaminants by high pressure fresh water cleaning. Abrasive blasting to very near white metal Sa 2½3 (ISO 8501-1:2007)...

P. 1

Product DataHEMPADUR 1540015400: BASE 15409: CURING AGENT 95100Description:HEMPADUR 15400 is a two-component, amine adduct cured epoxy paint, which cures to a coating withexcellent resistance to a wide range of chemicals as tabulated in separate CARGO...

P. 2

HEMPADUR 15400SURFACE PREPARATION:Steel: Remove oil and grease etc. thoroughly with suitable detergent. Remove salts and othercontaminants by high pressure fresh water cleaning. Abrasive blasting to near white metal Sa 2½ (ISO8501-1:2007) with a...

P. 1

Product DataHEMPEL'S ANTIFOULING GLOBIC 900078900Description:HEMPEL’S ANTIFOULING GLOBIC 9000 is a low friction, self-smoothening SPC antifouling with ahigh solids content.The nano-capsule acrylate copolymers are the main binder which in combination...

P. 2

HEMPEL'S ANTIFOULING GLOBIC 900078900SURFACE PREPARATION:According to specification. Existing old self-polishing or ablative antifouling: Remove possible oiland grease etc. with suitable detergent, followed by high pressure fresh water cleaning for a...

P. 1

Product DataHEMPEL'S ANTIFOULING GLOBIC 600075950Description:HEMPEL'S ANTIFOULING GLOBIC 6000 is a low friction, self-smoothening SPC antifouling with ahigh solids content. The controlled self-polishing is made possible partly by hydrolysis. Part of thebinder...

P. 2

HEMPEL'S ANTIFOULING GLOBIC 600075950SURFACE PREPARATION:According to specification.Existing old self-polishing or ablative antifouling: Remove possible oil and grease etc. with suitabledetergent, followed by high pressure fresh water cleaning for a thorough...

P. 1

Product DataHEMPADUR 1555315553: BASE 15557: CURING AGENT 98021Description:HEMPADUR 15553 is a two-component epoxy paint. It cures to a flexible, well adhering coating withgood abrasion and impact resistance. Contains zinc phosphate. Cures down to -10°C/14°F.Recommended...

P. 2

HEMPADUR 15553SURFACE PREPARATION:Stainless steel and aluminium: Remove oil and grease etc. thoroughly with suitable detergent.Remove salts and other contaminants by high pressure fresh water cleaning. Roughening of thesurface is recommended for optimum...

P. 1

Product DataHEMPADUR 1559015590: BASE 15599: CURING AGENT 95100Description:HEMPADUR 15590 is a two-component epoxy primer coating especially for use on surfaces exposedto severe abrasion.Recommended use:As a blast primer for heavy duty epoxy systems on...

P. 2

HEMPADUR 15590SURFACE PREPARATION:New steel: Remove oil and grease etc. thoroughly with suitable detergent. Remove salts and othercontaminants by high pressure fresh water cleaning. Abrasive blasting to Sa 2½-3 (ISO 8501-1:1988)depending on area...

P. 1

Product DataHEMPADUR 3556035560 : Base 35569 : curing agent 98560Description:HEMPADUR 35560 is a solvent-free, two-component, high-build, polyamine adduct cured epoxy paint,which cures to a coating with good resistance to fresh water.Recommended use:As...

P. 2

HEMPADUR 35560SURFACE PREPARATION:New steel: Remove oil and grease etc. thoroughly with suitable detergent. Remove salts and othercontaminants by high pressure fresh water cleaning. Abrasive blasting to near white metal Sa 2½ (ISO8501-1:1988) with...

P. 1

Product DataHEMPADUR EPOXY ADHESIVE 05674Base 05679: Curing agent 95670Description:HEMPEL’S EPOXY ADHESIVE 05674 is a two-component polyamine adduct cured epoxy glue. Lowviscosity and with good penetration properties.Recommended use:For gluing of...

P. 1

Product DataHEMPADUR FAST DRY 1556015560: BASE 15569 : CURING AGENT 97560Description:HEMPADUR FAST DRY 15560 is a two-component epoxy paint with a very short drying time. Containszinc phosphate.Recommended use:As a quick drying primer or intermediate...

P. 2

HEMPADUR FAST DRY 15560SURFACE PREPARATION:New steel: Remove oil and grease etc. thoroughly with suitable detergent. Remove salts and othercontaminants by high pressure fresh water cleaning. Abrasive blasting to Sa 2½ (ISO 8501-1:1988).For temporary...

P. 1

Product DataHEMPADUR HI-BUILD 4520C4520C: Base 45207: Curing agent 95040Description:HEMPADUR HI-BUILD 4520C is a two-component, high build epoxy paint. It forms a hard and toughcoating resistant to seawater, mineral oils and splashes from petrol and related...

P. 2

HEMPADUR HI-BUILD 4520CSURFACE PREPARATION:New steel: Abrasive blasting to Sa 2½ (ISO 8501-1:1988). For temporary protection, if required, use asuitable shopprimer. All damage of shopprimer and contamination from storage and fabrication shouldbe...

P. 1

Product DataHEMPADUR MASTIC 45880 /HEMPADUR MASTIC 45881Low to medium temperatures 45880 : Base 45889 : curing agent 95880High temperatures 45881 : Base 45889 : curing agent 95881Description:HEMPADUR MASTIC 45880/45881 is a two-component polyamide adduct...

P. 2

HEMPADUR MASTIC 45880 45881SURFACE PREPARATION:New steel: Remove oil and grease etc. thoroughly with suitable detergent. Remove salts and othercontaminants by high pressure fresh water cleaning. Abrasive blasting to minimum Sa 2½ (ISO 85011:1988)...

P. 1

Product DataHEMPADUR MULTI-STRENGTH 45701 /HEMPADUR MULTI-STRENGTH 45703Medium to high temperatures 45701: BASE 45705: CURING AGENT 97652Low to medium temperatures 45703: BASE 45705: CURING AGENT 98750Description:HEMPADUR MULTI-STRENGTH 45701/45703 is...

P. 2

HEMPADUR MULTI-STRENGTH 45701 45703SURFACE PREPARATION:New steel: Abrasive blasting to min. Sa 2½. (ISO 8501-1:1988) Grit surface profile, Rz minimum100 micron - maximum 150 micron, corresponding to ISO Comparator Coarse (G). Oil and grease mustbe...

P. 1

Product DataHEMPADUR PRO ZINC 1738017380 : BASE 17389 : CURING AGENT 98382Description:HEMPADUR PRO ZINC 17380 is a two-component, zinc rich epoxy primer.Offers cathodic protection of local mechanical damage.Recommended use:As a high solids, versatile,...

P. 2

HEMPADUR PRO ZINC 17380SURFACE PREPARATION:Remove oil and grease etc. thoroughly with suitable detergent. Remove salts and other contaminantsby high pressure fresh water cleaning.Abrasive blasting to Sa 2½ (ISO 8501-1:1988) with a sharp-edged surface...

P. 1

Product DataHEMPADUR PRIMER 1530C1530C: 1530R: 9504CDescription:HEMPADUR PRIMER 1530C is a two-component epoxy primer containing zinc phosphate as corrosioninhibiting pigment. It cures to a strong and rust-preventing coating.Recommended use:As a primer...

P. 2

HEMPADUR PRIMER 1530CSURFACE PREPARATION:New steel: Abrasive blasting to Sa 2½ (ISO 8501-1:1988). For temporary protection, if required, use asuitable shopprimer. All damage of shopprimer and contamination from storage and fabrication shouldbe thoroughly...

P. 1

Product DataHEMPADUR QUATTRO 1763417634 : BASE 17636 : CURING AGENT 97334Description:HEMPADUR QUATTRO 17634 is a two-component universal epoxy paint, which cures to a hard andtough coating with good resistance to abrasion, seawater and various oils.Recommended...

P. 2

HEMPADUR QUATTRO 17634SURFACE PREPARATION:New steel: Remove oil and grease etc. thoroughly with suitable detergent. Remove salts and othercontaminants by high pressure fresh water cleaning. Abrasive blasting to minimum Sa 2½ (ISO 85011:1988) with...

P. 1

Product DataHEMPADUR SPRAY-GUARD 35490 /HEMPADUR SPRAY-GUARD 35493High temperatures 35490: BASE 35499 : CURING AGENT 95690Medium temperature 35493: BASE 35499 : CURING AGENT 95790Description:HEMPADUR SPRAY-GUARD 35490/35493 is a solvent-free, two-component,...

P. 2

HEMPADUR SPRAY-GUARD 35490 35493SURFACE PREPARATION:New steel: Remove oil and grease etc. thoroughly with suitable detergent. Remove salts and othercontaminants by high pressure fresh water cleaning. Abrasive blasting to minimum Sa 2 (ISO 85011:1988)with...

P. 1

Product DataHEMPALIN DANREX 52360Description:HEMPALIN DANREX 52360 is a versatile, alkyd-based, economy paint with fairly good penetration intorough and porous substrate. Harmless to grain cargo.Recommended use:1. As a self-primed paint system on interior...

P. 1

Product DataHEMPASIL NEXUS 27302FOULING RELEASE TIECOAT 27302 : BASE 27309 : CURING AGENT 98100 : ADDITIVE 99701Description:HEMPASIL NEXUS 27302 is a high solid three component silicone based product.Recommended use:As a tiecoat for the HEMPASIL FOULING...

P. 2

HEMPASIL NEXUS 27302SURFACE PREPARATION:According to specification.Maintenance, old F/R systems: Possible spot repair with specified HEMPADUR system followed byspot application of the product.In any of the above-mentioned cases, a detailed working specification...

P. 1

Product DataHEMPASIL X3 87500FOULING RELEASE COATING 87500 : BASE 87509 : CROSSLINKER 98950Description:HEMPASIL X3 is a third generation fouling release coating with high solids content.The product is based on silicone, is biocide free and cures after...

P. 2

HEMPASIL X3 87500APPLICATION CONDITIONS:PRECEDING COATUse only where application and curing can proceed at temperatures above: 0°C/32°F. The temperatureof the surface and that of the paint itself must also be above this limit. Apply only on...

P. 1

Product DataHEMPEL'S ANTIFOULING DYNAMIC 79540Description:HEMPEL'S ANTIFOULING DYNAMIC 79540 is a high solid, self-smoothening and self-polishingantifouling based on a hydrolysing silyl acrylate binder that ensures effective polishing control. Aninorganic...

P. 2

HEMPEL'S ANTIFOULING DYNAMIC 79540SURFACE PREPARATION:According to specification.Existing old self-polishing or ablative antifouling: Remove possible oil and grease etc. with suitabledetergent, followed by high pressure fresh water cleaning for a thorough...

P. 1

Product DataHEMPEL'S ALUSAFE 7120DDescription:HEMPEL'S ALUSAFE 7120D is a copper-free self polishing sntifouling with organic bioactive material.It changes to final colour after approximately 1 week of exposure to water. Due to its self-renewingeffect...

P. 2

HEMPEL'S ALUSAFE 7120DSURFACE PREPARATION:Existing old self-polishing or ablative antifouling: Remove possible oil and grease etc. with suitabledetergent, followed by high pressure fresh water cleaning for a thorough removal of any possible weakstructure...

P. 1

Product DataHEMPEL'S ANTI-SLINT 67500Description:HEMPEL’S ANTI-SLINT 67500 is flame dried silica sand of which the average particle size isapproximately 0.5 millimetres.Recommended use:To obtain anti-skid properties on decks and other areas where...

P. 1

Product DataHEMPEL'S SEATECH SATIN VARNISH 09710Description:HEMPEL'S SEATECH SATIN VARNISH 09710 is a fast drying, one component water-borne acrylicsatin varnish with very high outdoor resistance. Contains UV filters.Recommended use:On a new as well as...

P. 2

HEMPEL'S SEATECH SATIN VARNISH 09710SURFACE PREPARATION:New wood: Sanding (remove dust). Saturate the dry, clean surface with suitable wood preservative,allow to dry. Apply one coat of the product thinned with: 20% Fresh water. Apply a second coat of...

P. 1

Product DataHEMPEL'S SUPERYACHT GLOBIC NCT 8990SDescription:HEMPEL’S SUPERYACHT GLOBIC NCT 8990S is a high solids, self-polishing antifouling. Based onHempels patented nanocapsule acrylate binder technology, self-polishing is controlled by sea watersinteraction...

P. 2

HEMPEL'S SUPERYACHT GLOBIC NCT 8990SSURFACE PREPARATION:Existing old self-polishing or ablative antifouling: Remove possible oil and grease etc. with suitabledetergent, followed by high pressure fresh water cleaning for a thorough removal of any possible...

P. 1

H E IVI PAS IL silicone-based fouling release The high-activity approach to surface coating

P. 2

The new dimension in surface contact • Fouling release Meeting the challenge < Environmental advantage • Fuel savings Specifications Business as usual Roughness or smoothness? Contents \ 2

P. 3

The new dimension in surface contact HEMPASIL silicone-based fouling release systems open up a new dimension in fouling control. HEMPASIL systems feature a "non-stick" surface that is smooth and flexible, with exceptionally low surface...

P. 4

How does silicone-based fouling release work? Fouling release systems are basically designed to hinder a wide variety of organisms from adhering to coated surfaces. Early fouling release coatings incorporated polytetrafluoro- ethylene...

P. 5

Meeting the challenge The technology behind silicone-based fouling release coatings and their properties is well known, but has proved difficult to implement in practice. This is because there are major challenges involved in getting the...

P. 1

HEMPADUR MULTI-STRENGTH 4575 For revenue earning spaces and exposed areas of ships Y

P. 2

Application of coating in a cargo hold. ail of bulkheads, vertical stiffeners and hoppers in a cargo hold after coating refurbishment. HEMPADUR MULTI-STRENGTH 4575 HEMPADUR MULTI-STRENGTH 4575 is a self-priming two-component highly...

P. 3

The world largest bulk carrier "Berge Stahl", Cargo Hold Coating Requirements Certain areas on a ship such as the bow, outer hull, decks and cargo holds are subject to severe abrasion and mechanical damage. Coatings used to protect these...

P. 4

Where to apply HEMPADUR MULTI-STRENGTH HEMPADUR MULTI-STRENGTH has been extensively applied during the building stage or at major refurbishments on a broad range of vessel types i.e. bulk carriers, oil tankers, chemical tankers, product carriers,...

P. 5

Features and benefitsFor the ship yard:For the owner:• igh build coating Fewer coats are needed and higherHproductivity is achieved• Easy on board maintenance Minor areas, can bemaintained by Hempel’s epoxy mastic rangeApplication...

P. 1

HEMPADUR FIBRE 4760 Flexibility where it counts HEMPEL

P. 2

Ballast tank challenge • Technology • PerformanceUniversal primer concept • Cost-effective where it counts2Contents

P. 3

Fibre-based advantage for ballast tanks Adding fibres to different materials to i=¿¿' ' boost both strength and flexibility is now a common practice in modern industry. Fibre- based materials are eminently suitable for uses...

P. 4

Example of the development of cracks and subsequent corrosion in a conventional epoxy coating applied with an excessive dry film thickness. The ballast tank challenge Ballast tanks account for a significant part of the total surface area...

P. 5

The technology Hempel has developed a breakthrough in protective epoxy coatings - by adding synthetic mineral fibres to an optimised epoxy formulation. The new HEMPADUR FIBRE 4760, specially designed for coating the inner surfaces of...

P. 1

H EM PELS SHOPPRIMER ZS 1589 High-quality zinc silicate shopprimer for optimising ship-building processes - compliant with IMO PSPC

P. 2

Today's shipbuilding industry is becoming increasingly competitive and companies are forced to focus on improved efficiency and profitability. Steel handling and fabrication are central elements in the ship-building process, and the quality...

P. 3

HEMPEL'S SHOPPRIMER ZS 1589... Offers competitive process speed, efficiency and productivity in steel mills, shipyards and other steel construction facilities. Provides excellent corrosion protection of steel during transport, storage, construction and...

P. 4

Product descriptionHEMPEL’S SHOPPRIMER ZS 1589 is a two-component, inhibitorfree, zinc containing, solvent-borne ethyl silicate shopprimer,specially developed for automatic spray application in lineproduction in fully automated shoppriming plants.Surface...

P. 5

Product performance HEMPEL'S SHOPPRIMER 1589 provides excellent corrosion protection during transport, storage and construction, even for extended periods depending on climatic and environmental conditions. Fast drying Quick drying time...