Catalogue Hella Marine Catalogue
www.hellamarine.com
print switch display
Page / 90
Where to buy
this product ?
Request
a Quote
Hella Marine - 57610, 60050
/ 90
See all the products Hella Marine
Text version of the page
EuroLED Touch marine lamps provide red and white, blue and white ■ pp or white only light using the latest completely sealed touch sensitive switching technology.
Lighting for boats control is beautifully simple with EuroLED Touch lamps. Touch the colour pad for red or blue light, the white pad for white light. On the dual colour versions, hold your finger on the pad for more than two seconds and the lamp will cycle through four dimming levels. Release your finger on the light level required.
Dual colour EuroLED Touch lamps can also be remotely operated from multiple points with 'off the shelf' ON/OFF/ON momentary switches. Holding one of the external switches for two seconds will synchronise the lamps to the same dimming level.
Light levels are 'remembered' by the lamps circuitry, even when a vessel's batteries are turned off. The lamp will always turn on at the colour intensity previously set, regardless of power interruption.
EuroLED Touch current draw is 4W on white (0.33A @ 12V) and less than 1.5W on red or blue (less than 0.125A @ 12V) to provide significant power savings.
Glare diffusion without light loss is important with any LED lamp to maintain efficiency and safety, particularly with powerful lamps such as the EuroLED series. Without the protection of advanced optics, significant eye strain can result from periods of looking directly into a powerful LED point source. Advanced Hella marine lens technology provides a safe, smooth and uniform light pattern, without glare or discomfort.
The durability of EuroLED Touch lamps is outstanding. Each lamp is completely waterproof, impact and shock resistant, for an ultra long service life. Multivolt™ circuitry provides consistent illumination across a range of input voltages from 9-33 DC, even under severe voltage fluctuations.
EuroLED Touch lamps overcome the poor reliability and light output problems of incandescent lamps. They provide ultra reliable, power saving lighting for all types of commercial and recreational applications.
Night Vision
- Why red light does not affect our night vision.
The human eye contains two types of receptors, the rods and the cones. Rods and cones have an increased sensitivity to frequency bands at different ends of the visual spectrum. Rods are largely responsible for our day time and colour vision and have an increased sensitivity towards the red band of the visual spectrum. Cones are responsible for our night vision capability and have an increased sensitivity towards the blue, shorter wavelength band of the visual spectrum. For this reason red light will not affect the sensitivity of the cones and with that our night vision is not affected by the use of red light in the cabin.
NauticExpo's Virtual Library: PDF Catalogues | Documentation | Boating Brochures | Manuals | Marine directory | Specifications | Characteristics
Search Go
page 1 p.1
page 2 p.2
page 3 p.3
page 4 p.4
page 5 p.5
page 6 p.6
page 7 p.7
page 8 p.8
page 9 p.9
page 10 p.10
page 11 p.11
page 12 p.12
page 13 p.13
page 14 p.14
page 15 p.15
page 16 p.16
page 17 p.17
page 18 p.18
page 19 p.19
page 20 p.20
page 21 p.21
page 22 p.22
page 23 p.23
page 24 p.24
page 25 p.25
page 26 p.26
page 27 p.27
page 28 p.28
page 29 p.29
page 30 p.30
page 31 p.31
page 32 p.32
page 33 p.33
page 34 p.34
page 35 p.35
page 36 p.36
page 37 p.37
page 38 p.38
page 39 p.39
page 40 p.40
page 41 p.41
page 42 p.42
page 43 p.43
page 44 p.44
page 45 p.45
page 46 p.46
page 47 p.47
page 48 p.48
page 49 p.49
page 50 p.50
Pages:
1-50
51-90
pdf-page pdf ne En 2008-12-49-02