| | | | | | | | | | | | | | | | | |
| | | |
| | | intelligent x-ply mix In order to guarantee longevity and stability optimums, we have focused our attention on an intelligent mixture of 5 different x-ply materials. | | multiple seam protection All seams in the significantly stressed foot area are protected by Dacron coverings. In addition to this, a wide webbing is sewn along the edges to spare the lower material and the seams. | | |
| | | |
| | | |
| | | low sleeve friction It is inevitable, while inserting the mast, the mast tip rubs against the head seam of the sleeve. Gun Sails sails are equipped with an inner close weaved, smooth strap over the whole length of the inner head seam, this protects the seam and reduces the friction forces of the mast. The large mast foot protector can be pulled back whilst rigging. It protects the board against the mast extension and the trim block of the sail. The uphaul can be comfortably inserted through an opening in the protector. | | |
| | | foot guard A PVC edging from foot to the clew area protects the leech edge against your board's nonslip coating. | | |
| | | |
| | | cams On our camber sails, we use special ball or roller bearing cams for a soft rotation and easy mast insertion. Each camber has a special shape and diameter, well-adapted for its position and guarantees an optimum fitting. | | |
| | | |
| | | |
| | | | | |
| | | batten guard PVC tabs on the upper battens prevent wearing out and abrasion whilst rigging. | | |
| | | strap on For very easy packing away and storage: Just roll the sail up and fix the elastic retainer. | | |
| | | |
| | | |
| | | |
| | | 9 | | |
| | | |
| | | | | | | | | | | | | | | | | |