KINGARY
24Pages

{{requestButtons}}

Catalog excerpts

KINGARY - 2

KINGRAY MATV products are designed in Australia by Standard Communications Pty Ltd. Since 1959, the company has steadily grown to become a highly respected force within the Australian electronics industry Recognized throughout the Asia/Pacific region for performance and reliability and cutting edge technology, our extensive range includes TV masthead amplifiers, stereo modulators, splitter The KM series of masthead amplifiers is the latest addition to the range. Incorporating cutting edge SMD technology, allowing us to reduce the size whilst maintaining reliability and performance. Features...

Open the catalog to page 2
KINGARY - 3

A masthead amplifier is designed to amplify low level off air signals. Due to these low level signals being amplified, a very low noise figure is necessary. All Kingray mastheads have been designed for user friendly digital and analogue installation in all local conditions. MASTHEAD AMPLIFIERS - WIDEBAND VHF/UHF 3 Our range of masthead amplifiers suit all digital applications whilst continuing to support analogue requirements. They are available in shielded and non-shielded models that incorporate the latest surface mount technology and include many user friendly features. Our new series II...

Open the catalog to page 3
KINGARY - 4

MASTHEAD AMPLIFIERS WIDEBAND VHF/UHF All Kingray masthead amplifiers meet the stringent requirements of both analogue and digital applications. The mechanical design is user friendly, with the ability for the PCB or die cast to tilt (Fig 1 ), allowing easy access to the connectors. A provision has been made within the masthead housing for the die cast lid to be held during installation (Fig 2). F Type masthead designed to amplify separate VHF and UHF antennas or a combined VHF/ UHF antenna. Optional shielded (FS) or non-shielded (F) models available. Packed without power supply. F Type...

Open the catalog to page 4
KINGARY - 5

Our IS09001 accreditation ensures every product is tested to meet or exceed all specifications and quality standards prior to packing, enabling a fault free installation every time. MASTHEAD AMPLIFIERS - UHF/ DIPLEX VHF 5 Standard Communications remains committed to the research and development of Kingray products. Our state of the art design manufacturing facility in the Sydney suburb of Gladesville utilises the latest software, RF and CAD techniques in the research and development of Kingray products. Screw and Saddle masthead designed to amplify a UHF antenna and diplex a separate VHF...

Open the catalog to page 5
KINGARY - 6

6 KM SERIES MASTHEAD AMPLIFIERS Kingray are proud to introduce the latest Australian designed amplifier range. The use of Advanced Surface Mount Technology and innovative design offers renowned Kingray quality and value in a compact housing. F type masthead designed to amplify separate VHF and UHF antennas or a combination VHF/UHF antenna. Built as a shielded model. Packed with a power supply. Also available in a trade pack - KMW32FSTP F type masthead designed to amplify separate VHF (Band 3 only) and UHF antennas or a combination VHF(BIII)/UHF antenna. Built as a shielded model. Packed...

Open the catalog to page 6
KINGARY - 7

Splitter amplifiers are designed to split and amplify signals that are of acceptable quality to one outlet 'unamplified'. When splitting to two or more outlets, noticeable deterioration is present. Kingray provide a complete range of splitter amplifiers for all applications. SPUTTER AMPLIFIERS The Kingray range of splitter amplifiers have been designed for superior performance for both digital and analogue terrestrial environments. The characteristics of the components selected provide a very low noise figure, a high output level and high return loss. The SA162/F and the SA164/F have been...

Open the catalog to page 7
KINGARY - 8

The Kingray MDA20 series is based on a new concept of convergent technology. The characteristics of the IC selected provide a noise figure that is lower than any other product on the market (<1.6dB) with an output figure that equals our DW42, 118 dB® -60 dB IMR, hence the name Masthead Distribution Amplifier (MDA). 8 MASTHEAD DISTRIBUTION AMPLIFIERS The MDA is a multipurpose amplifier that is ideal for our digital and analogue environment. Whether the unit is used as a masthead or distribution amplifier, the low noise figure, capacity for multiple channels with low distortion and a high...

Open the catalog to page 8
KINGARY - 9

Kingray's DW42 and DA43 distribution amplifiers have been designed to suit our current digital and analogue environment. The technology used is hybrid bipolar and GaAs, which allows for a greater output capacity, whilst having a lower noise figure. These amplifiers contain midstage gain controls and a number of flexible powering options are built in a fully shielded die-cast housing. TERRESTRIAL & SATELLITE DISTRIBUTION AMPLIFIERS 9 F Type distribution amplifier designed for a separate VHF or UHF antenna or a combined antenna via jumper link at the input. Can be remotely powered to the...

Open the catalog to page 9
KINGARY - 10

Kingray's power supplies maintain the reputation as the most reliable and highest quality within the industry. They feature posistor protection circuitry and fully comply with Australian and New Zealand energy standards, including MEP's compliance. IO POWER SUPPLIES AND INJECTORS INJECTOR TYPE (Allpre 1995models) MASTHEAD AMPLIFIERS Kingray has produced a range of very useful power and signal injectors. These products have been designed to remotely power a number of our products including amplifiers and modulators. Trace on wire = Positive Short Circuit Protected Trace on wire = Positive...

Open the catalog to page 10
KINGARY - 12

Modulators are designed to convert a base band or AV (Audio Video) signal into an RF signal. This allows the outputs from set top boxes, videos, DVD's, AM and FM tuners, CD players or cameras to be integrated into any television system. By using Kingray stereo modulators, (able to adjust the RF output frequencies via the dip switches), a flexible solution is available to suit every system. Allow for an RCA stereo or mono audio/video baseband input with a frequency adjustable RF output. MODVJV-A j^g unjt can ke remotely or rack (KR001) powered to the output socket, or a separate power supply...

Open the catalog to page 12
KINGARY - 13

MODULATORS - AP packages 13 Kingray’s ‘AP’ range of DSB stereo modulator packages are a cost effective approach to many head end projects. This package option allows for 6 to 8 channels to be modulated, combined and rack mounted at a cost reduction of approximately 15% off trade price compared to individual purchase. KR001 19” subrack/wall mount including Passive Combiner. The KR001 is a 19” subrack or wall mount designed to combine Kingray’s DSB modulator range of commercial products. Up to six modules can be powered and combined via the passive base. The single output provides an optional...

Open the catalog to page 13

All GME electrophones catalogs and brochures

  1. GX850

    2 Pages

  2. GX800

    2 Pages

  3. mt600

    2 Pages

  4. sound safe

    4 Pages

  5. GDEK

    2 Pages

  6. AIS

    4 Pages

  7. g-series

    6 Pages

  8. plb_epirb

    6 Pages

  9. MT400

    3 Pages

  10. ABL012

    1 Pages

  11. GP450X

    2 Pages

  12. GX600D

    2 Pages

  13. MT410G

    2 Pages

  14. Fact Epirbs

    2 Pages

  15. GR200

    2 Pages