4.
Dial up 90-100 psi of pressure at solvent regulator. While continuing to hand prime the pump for boats, trigger gun into suitable collection container. 5.
Using a proper collection container, open solvent flush valve at the INDy gun. Ensure that you have proper sol- vent flushing at the gun. 6.
Continue to hand prime the pump, with trigger pulled and inspect the flow of catalyst from nozzle. 7.
Once all air is evacuated and a steady stream of catalystis observed, the system is primed with catalyst. 8.
Release trigger and stop hand priming. 9.
Solvent flush gun Catalyst 5. 1.
Pull and rotate Pivot knob to disengage the catalyst drive arm. 2.
Turn the catalyst slavepump yellow ball valve to the open position. 3.
Hand prime the pumpuntil a steady stream of catalyst flows back to the bottle. 4.
Close the ball valve handstroke the pump until it developes 100-200 PSI.

34 Operation