9.
Put pick-up wand in bucket or drum of polyester. 10.
Inspect Catalyst bottle for debris; clean if necessary. Fill catalyst supply bottle. Two gallons; maximum amount in supply bottle. 11.
Inspect pick-up hoses to make sure they are not bent. 12.
Insert recirculation hoses in material drum or bucket. Start-Up Internal Mix 2.
Open main air valve at manifold. Solvent *Before initial operation of any internal mix system, Ensure that the solvent flush set- up is fully operational. 1.
Fill solvent pot with suitable flush material. 3.
Open ball valve at solvent regulator.

33 Operation