Salt 47’

- Aft arch for antennas, tender lifting system and bimini support- 8 standchions - 2 guardrail gateways - 2 mast balconies - Rigid hand rails fixed onto the arch and on the roof - Retractable swimming ladder in aluminium (fitted to the transom) - Structural davit with chain plate (for pole dowhaul or light wind sail tacks : spinnaker or gennaker) - Halyard stainless steel pins rail - Stainless steel tube for mast cables ACCESSORIES (entrance and rear arches, hatches and other accessories)a) Sandblasting, after sanding and cleaning b) Application of 2 primer epoxy layers c) Welding coating and sanding d) Application of 2 layers of polyurethane lacquers BOTTOM HULL :

II. PAINT HULL AND DECK

a) Sandblasting, after sanding and cleaning b) Application of a layer of wash primer c) Application of 2 layers of epoxy d) Application of 1 layer of inter-protect e) Application of the antifouling (specific for aluminium) TOPSIDES HULL : a) Sandblasting, after sanding and cleaning b) Application of a layer of wash primer c) Application of 2 layers of epoxy d) No fill in coating is provided in this specification booklet. This is subject to a specific demand. In the present case, only a finish coating will be proposed. e) Application of 2 layers of polyurethane and decorative hull strips

SANDBLASTING AND PAINTING

a) Sandblasting, after sanding and cleaning b) Application of a layer of primer c) Application of 2 layers of epoxy d) Welding, coating and sanding e) Application of 2 polyurethane layers on areas where no non-skid paint is applied f) Application of a layer of hanging paint and a layer of non skid paint on roof lid, deck and gang way DECK :

C

HANTIER

N

AVAL

G

ARCIA

6