• Products
  • Catalogues
  • News & Trends
  • Exhibitions

Gaiotto Robotized Glazing in Sanitaryware Production - 32 Pages

  1. P. 1

  2. P. 2

  3. P. 3

  4. P. 4

  5. P. 5

  6. P. 6

  7. P. 7

  8. P. 8

  9. P. 9

  10. P. 10

  11. P. 20

  12. P. 30

Catalogue excerpts

Robotized glazing in sanitaryware production Smaltatura robotizzata nella produzione dei sanitari Esmaltado robotizado en la produccion de los sanitarios

 Open the catalogue to page 1

ROBOTIZED GLAZING IN SANITARYWARE PRODUCTION Smaltatura ROBOTIZZATa NELLA PRODUZIONE DEI SANITARI ESMALTADO ROBOTIZADO EN LA PRODUCCION DE LOS SANITARIOS Gaiotto has a wide range of available solutions, suitable for different technical requirements as well as for any budget. GA2000 the widely successful selflearning robot. GA-OL (off-line) the new Gaiotto robot designed for off-line programming. GA/F-OL (off-line) the fruit of a closely-knit cooperation between Gaiotto and Fanuc. All three robots can be fully integrated with accessories completing their set-up, such as controlled turntable axes...

 Open the catalogue to page 2

Robot Robot Robot Accessories Accessori Accesorios Carousels and conveyors Giostre e caroselli Carruseles y transportadores Inspection and glazing booths Cabine di ispezione e smaltatura Cabinas de inspección y esmaltado Transfer units and conveyors Trasferitori e trasportatori Trasladadores y transportadores Siphon glazing machines Smaltasifoni Esmaltadora de sifones Gantry loaders and robots Portali e robot Pórticos y robots

 Open the catalogue to page 3

GA2000 has a lightweight structure for easy handling by spring balancing and a pneumatic cylinder: the cylinder and the springs are adjustable to make the robot configuration suited to special programming requirements. GA2000 may also be topmounted without any mechanical or electronic changes being required. The precision reversible reduction gear system allows for self-learning on all six axes with static repeatability up to ±1 mm. Motion is ensured by brushless servo motors, without any brushes and electric circuits in motion. GA2000 è dotato di una struttura leggera e facile da manovrare con...

 Open the catalogue to page 4

Hermetically sealed gearmotors, protective casings on all the motors and minimised number of connections all guaranteeing a suitable protection degree. Maintenance can be carried out in a user-friendly manner thanks to easy access to all moving parts. The electric control panel includes all the electronic control devices for the auxiliary axes and glaze flow rate control system (Mass Control system). Riduttori ermetici, carter di protezione su tutti i motori e il minimo numero di connessioni garantiscono il corretto grado di protezione. La massima facilità di manutenzione è assicurata da un accesso...

 Open the catalogue to page 5

GA-OL (off-line) GA-OL is the new robot by Gaiotto, specifically designed for off-line programming. GA-OL è il nuovo robot Gaiotto, studiato appositamente per la programmazione off-line. More straightforward compared to GA2000 (as it does not feature a self-learning function), it ideally complements the glazing cell internal equipment. Built according to the same kinematics as the older model, it is able to make full use of any software generated by the selflearning robot. Più semplice, perché senza l’autoapprendimento rispetto al GA2000, ne rappresenta il complemento ideale all’interno delle...

 Open the catalogue to page 6

Hermetically sealed gearmotors, protective casings on all the motors and minimised number of connections all guaranteeing a suitable protection degree. Maintenance can be carried out in a user-friendly manner thanks to easy access to all moving parts. The electric control panel includes all the electronic control devices for the auxiliary axes and glaze flow rate control system (Mass Control system). Riduttori ermetici, carter di protezione su tutti i motori e il minimo numero di connessioni garantiscono il corretto grado di protezione. La massima facilità di manutenzione è assicurata da un accesso...

 Open the catalogue to page 7

GA/F-OL (off-line) GA/F-OL is Gaiotto’s recommendation for all those who wish to introduce an optimised automation solution in the form of a Fanuc robot. GA/F-OL è la proposta Gaiotto per chi vuole investire in automazione con una soluzione ottimizzata avvalendosi di un robot Fanuc. GA/F-OL es la propuesta de Gaiotto para quien desea invertir en automoción con una solución optimizada utilizando un robot Fanuc. Full compatibility with the Gaiotto off-line programming software package. Full integration with the glaze flow rate control system (Mass Control). Wrist joint load and working range specifications...

 Open the catalogue to page 8

ROBOTS DATA SHEET CARATTERISTICHE TECNICHE ROBOTS CARATTERISTICAS TECNICAS DE LOS ROBOTS MACHINE BODY CORPO MACCHINA CUERPO MAQUINA rated wrist load (kg) carico nominale al polso (kg) carga nominal en la muneca (kg.) weight (w/o control panel) (kg) peso (escluso quadro elettrico) (kg) 550 550 250 peso (excluido el cuadro electrico) (kg) CONTROL PANEL QUADRO ELETTRICO CUADRO ELECTRICO air-conditioner included included optional condizionatore incluso incluso opzionale acondicionador incluido incluido opcional installed power (w/o additional axes) (kW) potenza installata (escluso gli assi aggiuntivi)...

 Open the catalogue to page 9

ACCESSORIES ACCESSORI aCCESORIOS To complete the glazing robot range in a fully integrated manner, Gaiotto has developed a number of systems making glazing more effective and reliable: 7WD® for programming purposes, Visus® and Mass control® for process control. 7WD® (7 Work Digital axes) is a software package suitable for off-line programming made by Gaiotto, an application solution which can be ideally integrated in all the range robots and in the Mass Control glaze flow rate control system. Starting from the digitisation of the workpiece, the system enables to create glazing software while sitting...

 Open the catalogue to page 10

FUNCTIONS FUNZIONI FUNCIONES CHARACTERISTICS PRESTAZIONI PRESTACIONES Importing drawings from CAD 3D or digitiser Importazione disegni da CAD 3D o digitalizzatore Importación diseños desde CAD 3D o digitalizador Work platform in a Windows environment with the following requirements: Intel Pentium Dual Core processor 2 Gb RAM main board Video graphic board supporting OpenGL (e.g.: ATI Radeon X1550 512MB) 17” screen Hard-disk ≥ 30 GB WINDOWS XP Professional operating system Piattaforma di lavoro in ambiente Windows con questi requisiti: Processore Intel Pentium Dual Core Scheda madre con 2 Gb RAM...

 Open the catalogue to page 11

All Gaiotto catalogues and brochures

  1. Ceramics

    12 Pages

    En
  2. plastic bathtubs

    12 Pages

    En