• Products
  • Catalogues
  • News & Trends
  • Exhibitions

Seahaven Pontoons - 2 Pages

  1. P. 1

  2. P. 2

Catalogue excerpts

SeaHaven Pontoons The SeaHaven is a classic marine pontoon system with an enviable reputation for durability. It can be relied upon to provide a safe haven for leisure and commercial craft in almost any location. Kinlochbervie Harbour, Scotland Each float is fully interchangeable and polystyrene filled. They are of a heavy duty construction; rotationally moulded to provide the necessary buoyancy whilst remaining resistant to impact damage, frost and long term decay such as spalling found on concrete floats. Access for repairs and maintenance is gained simply by removing the decking sections from above. Just four securing bolts releases each float for exchange or inspection. Evolved over 35 years to cope with Interconnections are achieved by utilising 4 No. heavy duty rubber blocks the demanding conditions of the combined with heavy M24 bolts and nyloc threaded nuts. This arrangement North Atlantic, these pontoons are gives excellent lateral and vertical movement whist maintaining high trusted by specifiers, designers performance in compression and tension. Noise is virtually eliminated. and users alike. Using a As standard, the pontoons are available in widths of 2, 2.5 & 3M and lengths combination of heavy duty of 7, 10, & 12M. Bespoke sizes can be achieved and specially strengthened versions are possible where high loadings such as bridge landings and commercial steel sections, in an allpedestrian traffic is likely. welded construction, gives the finished unit superb Simple and elegant service access covers run along both sides of the pontoons providing easy unhindered access to cabling and other services. A specially developed stability and torsional access system allows simplified drop-in deployment of entire cable lengths from above, strength. reducing installation time and cost. Quality Management

 Open the catalogue to page 1

SeaHaven Pontoons Technical – (Standard Model) Design loads • 1.5 kN/m2 applied • UDL as standard, higher loadings are available Design guidelines • YHA Code of Practice, 7th Edition & Current ISO Standards for Steelwork • Freeboard; 550mm (nominal unloaded), Adjustable with float configurations • Draft: 380mm (nominal) Framework • Completely welded fabrication consisting of channel and hollow structural steel sections. Floatation • UV stabilised polyethylene floats highly resistant to oil & chemicals • Roto-moulded and filled with solidified polystyrene. • Optimal buoyancy trim through selection...

 Open the catalogue to page 2

All Gael Force Marinas and Pontoons catalogues and brochures