Seahaven Pontoon Fingers - 2 Pages

Add to MyNauticExpo favorites
Seahaven Pontoon Fingers

Catalog excerpts

SeaHaven Fingers The SeaHaven is a classic marine pontoon system with an enviable reputation for durability. It can be relied upon to provide a safe haven for leisure and commercial craft in almost any location. Inverness Marina, Scotland Each float is fully interchangeable and polystyrene filled. They are of a heavy duty construction; rotationally moulded to provide the necessary buoyancy whilst remaining resistant to impact damage, frost and long term decay such as spalling found on concrete floats. Access for repairs and maintenance is simply gained by removing the decking sections from above. Just four securing bolts releases each float for exchange or inspection. Evolved over 35 years to cope with The pontoon fingers utilise the same high quality components and design the demanding conditions of the as used on the pontoons. Radiused end geometry softens the entry to each North Atlantic, these pontoons are berth eliminating damaging harsh corners. Whilst the shoreward end flares trusted by specifiers, designers toward the junction with the pontoons, strengthens the connection and provides pedestrians with generous wide lead-in to each finger. and users alike. Using a combination of heavy duty Standard, lengths are 6, 8 10 & 12m, with a width of 1m. Other sizes can be achieved and special angles can be manufactured to fit individual layouts. steel sections, in an allwelded construction, gives All Pontoon Fingers are joined to pontoons via heavy block and bolt connections. the finished unit superb They can be optimally positioned to deliver precise, individual berthing requirements. stability and torsional strength. Quality Management

 Open the catalog to page 1

SeaHaven Pontoon Fingers Technical - (Standard Model) Design loads •    1 kN/m2 applied • UDL as standard, higher loadings are available Design guidelines • YHA Code of Practice, 7th Edition & Current ISO Standards for Steelwork • Freeboard; 550mm (nominal unloaded), Adjustable with float configurations • Draft: 380mm (nominal) Framework • Completely welded fabrication consisting of channel and hollow structural steel sections. Floatation • UV stabilised polyethylene floats highly resistant to oil & chemicals • Roto-moulded and filled with solidified polystyrene. • Optimal buoyancy trim...

 Open the catalog to page 2

All Gael Force Marinas and Pontoons catalogs and brochures