• Products
  • Catalogs
  • News & Trends
  • Exhibitions

GFMA18 SeaHaven HD Pontoon - 2 Pages

Add to MyNauticExpo favorites
GFMA18 SeaHaven HD Pontoon
  1. P. 1

  2. P. 2

Catalog excerpts

Hams, Scotland 'Haven HD Pontoons The SeaHaven HD is a heavy duty marine pontoon system with an enviable reputation for durability. It can be relied on to provide a safe haven for leisure and commercial craft. Specifically designed for exposed & coastal locations. y marine    Each float is fully interchangeable and polystyrene filled. They are *    of a heavy duty construction; rotationally moulded to provide the e relied    necessary buoyancy whilst remaining resistant to impact damage, sure    frost and long term decay such as spalling found on concrete floats. y    Access for repairs and maintenance is gained simply by removing the Developed over 35 years’ experience derived from challenging sites, these pontoons are trusted by specifiers, designers and users alike. Using a combination of robust steel sections, in an all-welded construction, gives the finished unit superb stability and torsional strength. decking sections from above. Just four securing bolts releases each float for exchange or inspection. Interconnections are achieved by utilising 4 No. heavy duty rubber blocks combined with heavy M24 bolts and nyloc threaded nuts. This arrangement gives excellent lateral and vertical movement whist maintaining high performance in compression and tension. Noise is virtually eliminated. The pontoons are available in widths of 2, 2.5 & 3M and lengths of 7, 10, & 12M. Bespoke sizes can be achieved and specially strengthened versions are possible where high loadings such as bridge landings and commercial pedestrian traffic is likely. Simple and elegant service access covers run along both sides of the pontoons providing easy unhindered access to cabling and other services. A specially developed access system allows simplified drop-in deployment of entire cable lengths from above, reducing installation time and cost. Gae Force MARINAS & PONTOONS

 Open the catalog to page 1

SeaHaven HD Pontoons Technical – (HD Model) Design loads • 1.5 kN/m2 applied minimum • UDL as standard, higher loadings are available Design guidelines • YHA Code of Practice, 7th Edition & Current ISO Standards for Steelwork • Freeboard; 550mm (nominal unloaded), Adjustable with float configurations • Draft: 380mm (nominal) Framework • Completely welded fabrication consisting of channel and hollow structural steel sections. Floatation • UV stabilised polyethylene floats highly resistant to oil & chemicals • Roto-moulded and filled with solidified polystyrene. • Optimal buoyancy trim through selection...

 Open the catalog to page 2

All Gael Force Marinas and Pontoons catalogs and brochures