Enter the data required and con- firm by pressing This piece of information is used to calculate the values displayed in the ROUTE INFO window. Press the Entering speed and fuel consumption data POSITION WP NO. or press the The time to arrive to the waypoint and fuel consumption are dis- played provided that estimated speed and fuel consumption val- ues have been entered (see the Entering speed and fuel consump- tion data Route CURSOR : Waypoint ID ENTER : Waypoint latitude and longitude Section).To switch to the next pageshowing the geographical coor- dinates of each waypoint, use the PAGE key. Go back to theprevious page by using . PAGE key to display themenu, select ROUTE, INFO and press ENTER key to exit. . CURSOR 46 Press the Deleting a route Press the Recalling a route from theCompactFlash Press the Storing a route in the CompactFlash CURSOR ENTER PAGE PAGE PAGE ENTER ENTER ™ key and then press to confirm.By selecting CURRENT, the route currently displayed will bedeleted; the route can also be deleted by pressing the key to display themenu, select ROUTE, RECALL and press key to display themenu, select ROUTE, STORE and press key to display the menu, select ROUTE, DE-LETE and press . to open the route catalog; select the route bythe To change thedefault name and to confirm the operation, use the ENTER CURSOR to confirm.The catalog that lists the routes stored in the CompactFlash™will show the CURRENT item indicating the route currently displayed. Select the route to delete by the key.The“ROUTE STORED” messagewill confirm that the route has been stored correctly. Once stored, the route will disappear from the screen. ™ ENTER to confirm, or CURSOR key, thenpress CLR PAGE EnglishEnglish keywhile in Navigation mode. 47 toexit.The route recalled will be displayed, the Autozoom functionautomatically enabled and a window will allow selecting the target waypoint.