key, it is possible to switch to Cursor mode (editing mode). The cursor geographical position is shown by two windows.To plot a route starting from theboat’s position, move the cursor to the position desired, and press The GEONAV is in Navigationmode; by pressing the ENTER CURSOR Getting Started to insert a waypoint at thecursor’s position, that will be in-dicated by a circle containing the number 1.The windows will show dis-tance, bearing and the time to reach the target waypoint.Press the PAGE and repeat the operationsdescribed above.As new waypoints are added, thenumbering will increase progres- sively. In case of error, waypoints can be deleted by pressing the PAGE . key to go back toNavigation mode. To add more waypoints, press CURSOR CLR key(Cursor mode), starting from the last entered. To go back to Navigation mode, press 32 NOTE: If an marine autopilot is connected to the GEONAV, the plotted routeis automatically followed as soon as the Navigation mode is enabled. The cursor can be moved to the desired position by using the GOTO functionas well. See the GOTO Section for more details. EnglishEnglish 33