LANOCOTE
®
,MARELON
®
LANOCOTE
® LONG TERM CORROSION CONTROL
CHOICE OF MARINE PROFESSIONALS
HOW DOES LANOCOTE
® WORK? LanoCote
® works on these fivebasic principals: displaces water, absorbs corrosion, forms moisturebarrier, penetrates and has high lubricity. LanoCote
® prevents dissimilarmetal galvanization. LanoCote
® is extremely effective in preventingand stopping corrosion on all types of metals under all environmentalconditions. Formulated to withstand salt water marine conditions, LanoCote LanoCote
® is particularly useful in preventing thread seizure due toall types of corrosion on boats and machinery. Applied during assembly,
® will greatly assist in easy dismantling years later.An example would be
boat anchor marine shackles which are regularly immersedin salt water. LanoCote
® also combats galvanization where dissimilarmetals are fastened together, such as stainless steel fittings on alloy
boat masts etc. Part No.ModelOffered In
770001LanoCote ® 4 oz. Jar12 Packs Only770002LanoCote ® 7 oz. Aerosol Spray Can12 Packs Only770003LanoCote ® 16 oz. JarSold as Each LanoCote ® is a Regestered Trademark of Lanocote, Inc. ASSORTED CLEATS
Molded from high-strength Marelon
® , Forespar’s cleats have been thoroughly tested by independent laboratories and manufacturersof
yatchs and power boats all over the world. Their strength,
light for boats weight and low cost have contributed to their increased use in themarine industry. The use of Marelon
® allows our cleats to take up the curve of a deck without breaking, while maintainingstrength and resisting abrasion — will not soften on hot days or freeze in winter.
Part ModelHoleNo.No.Dia. 5"(127mm) & 6"(152.4mm) CLEAT3"(76.2mm) - 8"(203.2mm) CLEATS
TRANSOM STEPS/HANDLE
6-5/8"(168.27mm) long x 2-9/16"(65.08mm) deep Part ModelHoleSizeNo.No.Dia.
941000MF 751/53/16"(4.76mm)941001MF 751/63/16"(4.76mm) 941018MF 761/35/32"(3.97mm)3"(76.2mm)941016MF 762/43/16"(4.76mm)4"(101.6mm)
941013MF 763/53/16"(4.76mm)5"(127mm)941014MF 764/6.51/4"(6.35mm)6.5"(165.1mm)941015MF 765/81/4"(6.35mm)8"(203.2mm) Part No.Model No. Hole Dia. ___
890017MF 750 BLACK1/4”(6.35mm) LOW PROFILE 6"(152.4mm) CLEAT
Forespar
® hinges are precision molded in a special grade of verystrong Part No.Model No.Hole Dia. Marelon
® and have a stainless steel hinge
sailboat pin. They may beused on interior or exterior surfaces as they are U.V. stabilized. Do not confuse these with other makes of "plastic" hinges.
941006MF 766/61/4"(6.35mm) LINE CHOCKS —
3-1/2"(88.9mm) & 6"(152.4mm)
Part No.Model No.Size PartModel Hole Ctrs.Hole No.No.Ctrs.Dia.
890007MF 600 B3"(76.2mm) X 1 3/8"(34.92mm)890009MF 601 B2 1/4"(57.15mm) X 1 3/8"(34.92mm)890011MF 602 B1 1/2"(38.1mm) X 1 3/8"(34.92mm) 950001MF 7553-1/2"(88.9mm)3/16”(4.76mm)950000MF 7706"(152.4mm)1/4”(6.35mm) VISIT OUR WEBSITE • www.forespar.com
17