JIB ROLLERS & SHACKLE GUARDS
SR-3 Sail Saver Jib Roller
These light weight, easily installed rollers can be used on the spreader tips or life lines to help skirt the foot of the jib. Sail Saverscan also be used on backstays of
catamarans or other boats with large roached mainsails. Center hole is 3/16 and can be drilledout to 3/8 maximum. Simple installation with a small screw driver. The unique locking collar is held in place with a small stainless steel set screw sothere is no need for
rigging tape or wire. The two halves mate (slide them together and they lock) and two clips are snapped onfor added safety. Quick and simple. Easy to put on and also easy to remove. Sold in pairs.
Part No.
Locking collar with set screw.
210020 SHACKLE GUARDS JIB ROLLER SR-2
Place a protective buffer between the
spinnaker pole ends andyour after-guy shackle. Made of high-strength polyethylene,
these tough polymer guards are UV inhibited for long life.
Shackle Guards can also be used on lifelines to skirt genoas. Sold individually Jib rollers for wire sizes 3/16 to3/8. Extend the life of your
genoa by reducing chafe on the
spreader tips.Jib rollers can also be used onlifelines for helping pass foot of
jib over stanchions. Sold in pairs. .
Part No.Model No.Size
300006SG-1 White2-1/4" Dia. X 3/8" ID300007SG-2 White2-1/4" Dia. X 1/2" ID300008SG-3 White3" Dia. X 1/2" ID300009SG-4 White3" Dia. X 5/8" ID300010SG-5 White3" Dia. X 3/4" ID300085SG-1 Red2-1/4" Dia. X 3/8" ID300086SG-2 Red2-1/4" Dia. X 1/2" ID300087SG-3 Red3" Dia. X 1/2" ID300088SG-4 Red3" Dia. X 5/8" ID300089SG-5 Red3" Dia. X 3/4" ID300090SG-1 Green2-1/4" Dia. X 3/8" ID300091SG-2 Green2-1/4" Dia. X 1/2" ID300092SG-3 Green3" Dia. X 1/2" ID300093SG-4 Green3" Dia. X 5/8" ID300094SG-5 Green3" Dia. X 3/4" ID Part No.Model No.Wire Size
210003SR-2 (pr.)Accepts wire 3/16 to 3/8 Deluxe aluminum turnbuckle covers give a fine
yacht the finished look. Functional (keeps sheets from snagging on turnbuckle clevis pins) and durable, the turnbuckle covers come in three sizes to handle rigging from 7/32 to 1/2 wire
diameter. They are available in a white finish or clear anodized
(silver) aluminum finish. The bases (bottom) come square and
can be notched (to fit over chain plates) or cut to match your
deck/shroud angle. Sold individually .
Small-
(1-1/2 diameter tubes) for 7/32, 1/4 and 9/32 wire sizes.#210013 Anodized#210010 WhiteLength - 22 Medium-
(2 diameter tubes) for 5/16 and 3/8 wire sizes.#210014 Anodized#210011 WhiteLength - 26 Large-
(2-1/2 diameter tubes) for 7/16 and 1/2 wire sizes.#210015 Anodized#210012 WhiteLength - 36 24
VISIT OUR WEBSITE www.forespar.com