LANOCOTE
®
,MARELON
®
CLEATS & CHOCKS LANOCOTE
® LONG TERM CORROSION CONTROL
CHOICE OF MARINE PROFESSIONALS
HOW DOES LANOCOTE
® WORK? LanoCote LanoCote
® works on these fivebasic principals: displaces water, absorbs corrosion, forms moisture
barrier, penetrates and has high lubricity. LanoCote
® prevents dissimilarmetal galvanization. LanoCote
® is extremely effective in preventingand stopping corrosion on all types of metals under all environmental
conditions. Formulated to withstand salt water marine conditions, LanoCote
® is particularly useful in preventing thread seizure due toall types of corrosion on boats and machinery. Applied during assembly,
® will greatly assist in easy dismantling years later.An example would be anchor
shackles which are regularly immersed
in salt water. LanoCote
® also combats galvanization where dissimilarmetals are fastened together, such as stainless steel fittings on alloy masts etc.
Part No.ModelOffered In
770001LanoCote ® 4 oz. Jar12 Packs Only770002LanoCote ® 7 oz. Aerosol Spray Can12 Packs Only770003LanoCote ® 16 oz. JarSold as Each LanoCote ® is a Regestered Trademark of Lanocote, Inc. ASSORTED CLEATS
Molded from high-strength Marelon
® , Forespar’s cleats have been thoroughly tested by independent laboratories and manufacturersof
yachts and
power boats all over the world. Their strength, light weight and low cost have contributed to their increased use in themarine industry. The use of Marelon
® allows our cleats to take up the curve of a deck without breaking, while maintainingstrength and resisting abrasion — will not soften on hot days or freeze in winter.
5" & 6" CLEAT3" - 8" CLEATS LOW PROFILE 6" CLEAT Part No.Model No.Hole Dia. Part No.Model No.Hole Dia. Part No.Model No.Hole Dia.Size
941006MF 766/61/4" 941000MF 751/53/16"941001MF 751/63/16" 941018MF 761/35/32"3"941016MF 762/43/16"4"
941013MF 763/53/16"5"
941014MF 764/6.51/4"6.5"
941015MF 765/81/4"8" EXIT BOX
This new exit box is made for use with the new high-tech fibers. Marelon Forespar
® uses this new exit on all trip lines and topping lifts. It is suitable for aluminum and ideal for carbon fiber poles as there is no
metal to metal contact to promote corrosion. The axles are stainless
steel molded into a strong
LINE CHOCKS — 3-1/2" & 6"
® cheek with no moving parts. Flange size: 3-1/4” L X 7/8” W Cut-out size: 2” X 11/16” Maximum line size: 1/4” Uses two 3/16”
flat head fasteners.
Part No.Model No.Hole Ctrs.Hole Dia.
950001MF 7553-1/2"3/16”950000MF 7706"1/4” Part No.Model
030016 Marelon ® Exit Box VISIT OUR WEBSITE • www.forespar.com
23