FMP 200
2Pages

TECHNICAL DATA SHEET FIX IT GLUE - FMP200 Revision: 01/2011 Technical Data: Base Consistency Curing system Open Time(*) Clamp Time (*) Compression Strength Specific Gravity Water Resistance Temperature Resistance (cured) Shear Strength Solid Contents Coverage (*) Values may vary depending on environmental conditions Product: Fixit Mate Glue is a single component fast drying polyurethane based wood adhesive, with a very high bond strength and excellent water resistance. Characteristics: - Easy application - Fast drying, 3-4 times faster than other glues - Foaming penetration properties to fill voids - High bond strength - Water resistance; D4 (DIN EN 204) - Can be used on damp timber Applications: Bonding of all types of timber and timber components. Suitable for use on hardwoods (oak, teak & other exotic timbers). Bonding MDF, particle board, formica and veneers. Suitable for bonding composite sandwich panels, insulation materials and as a construction adhesive in carpentry. Packaging: Colour - Honey Packaging – 750 gm bottle Page 1 of 1 Polyurethane Without Solvent Liquid Moisture Cure 30 Minutes 1-2 Hrs 1Kg/cm2 1.1g/mL 100% to D4 (DIN EN 204) -30°C to 100°C > 10 N/mm2 95% Ca. 150mL/m2 Shelf life: 36 months. In unopened packaging in a cool and dry storage place a t temperatures between +5°C and +25°. Do not expose to frost Surfaces: State of Surface: clean, dry, free of dust and grease. Preparation: slight moistening of the surfaces improves the curing rate and gap filling properties. We recommend a preliminary compatibility test. Application of Adhesive: Apply adhesive with a brush or an adhesive comb, join substrates and clamp for between 1-2 Hrs depending on environmetal conditions. Application temperature: +5°C t0 35°C Clean: Methylated Spirits or an alcohol cleaner Health- and Safety Recommendation: Apply the usual industrial hygiene. Wear gloves . Safety Glasses. Note: The contents contained in this documentation are the result of our experiments and our experienceand have been submitted in good faith. Because of the diversity of the materials and substrates and the real number of possible applications which are out of our control we cannot accept any responsibility for the results obtained. In every case it is recommended to carry out preliminary experiments and compatibility tests. Fixtech Pty Ltd. PO Box 568, Southport, Qld 4215. Tel: +61 (0)7 5530 1099. Fax: +61 (0)7 5530 1322 Email: info@fixtech.com.au Web: www.fixtech.com.au

TECHNICAL DATA SHEET FIX IT GLUE - FMP200 Revision: 01/2011 The specific properties of substrates will differ from manufacturer to manufacturer we strongly recommend compatibility tests. Page 2 of 2 Remarks: • Fixseal MSP may be overpainted with water based paints, however due to the large number of paintes and varnishes available we strongly recommend compatability tests before application. The drying time of some alkyd paint systems may increase. Note: The contents contained in this documentation are the result of our experiments and our experienceand have been submitted in good faith....