367TPD
6Pages

{{requestButtons}}

Catalog excerpts

367TPD - 1

Touch Panel Display Module The E-Plex 367TPD series has a resistive touch panel, with LED's for status indication and a 4-digit, 7-segment numerical LED display allowing valuable information to be viewed. The touch panel display also includes an audible alarm for switch input verification or alert conditions. Customizable artwork is available for button identification. The display's electroluminescent (EL) backlight allows the entire touch screen to be illuminated uniformly, making it easy to view in various lighting conditions. The backlight can also be operated in a screen saver mode which will blank it when not in use to extend the life of the EL panel. In addition, the audible alarm can be muted for nighttime operation. • 6 LED's for status indications • Up to 8 user-defined touch regions • Piezo buzzer for alert notification • Electroluminescent backlight for night-time • 3" diagonal resistive touch panel • 4-digit numerical display to show values with tenths decimal point • Custom artwork overlays with a variety of plastic bezel finishes for interior aesthetics Design Specifications • Impact resistance : 9g steel ball dropped from • Vibration : 1G, 10 - 500Hz for 1 hour, each direction Powering systems - Empowering designers

Open the catalog to page 1
367TPD - 2

Electrical Specifications Physical Specifications Wiring Specifications NOTE: 1. Unrestricted topology: Star, Tree, Daisy Chain configurations all valid. Powering systems - Empowering designers

Open the catalog to page 2
367TPD - 3

Typical Wiring Diagram Connection Specifications Powering systems - Empowering designers

Open the catalog to page 3
367TPD - 4

Dimensional Diagram Dimensional Diagram Cut / route out a hole in the surface to allow the wiring and protruding components on the back side of the module to protrude through. The hole-saw cut should be at least 2.84" x 2.29" (72.14mm x 58.17mm). Then, drill four mounting holes 0.15" diameter for the mounting screws. Mounting Specifications Cut / route out a hole in the surface to allow the wiring and protruding components on the back side of the module to protrude through. The hole-saw cut should be at least 2.84" x 2.29" (72.14mm x 58.17mm). Then, drill four mounting holes 0.15" diameter...

Open the catalog to page 4
367TPD - 5

Dimensional Diagram Ordering Information Standard Bezel Options Flat Black Black Metallic Gold Soft Gold Grey White Silver Chrome Metallic Nickel Bezel Gloss Bezel Gloss Bezel Satin Bezel Gloss Bezel Gloss Bezel Gloss Bezel Gloss Bezel Powering systems - Empowering designers

Open the catalog to page 5
367TPD - 6

367TPD Series BATTERY 325QMM, 366HMM, 422QMM & 436MMX : 4, 6 or 10 channel multi-modules for control of lighting, including dimming and user-defined “mood” lighting POWER INVERTER 400ECM, 450ECM & 500CCM : Electronic control modules (“clocks”) that function as the master controller and programmer of the entire E-Plex system 361SIM : Inverter interface for complete control over your inverter functions 345LCD, 350LCD & 452LCD : 5.7”, 10” & 12” color LCD touchscreen displays that allow the user to interface with the E-Plex system, including monitoring and control functionality and includes...

Open the catalog to page 6

All E-PLEX catalogs and brochures

  1. E-Plex 303TM

    2 Pages

  2. E-Plex 172QR

    2 Pages

  3. 442EMS

    6 Pages

  4. 406QDM

    6 Pages

  5. 318PFTG

    5 Pages

  6. 436MMX

    6 Pages

  7. 425DRM

    7 Pages

  8. 413DWM

    6 Pages

  9. 428RSP

    11 Pages

  10. 416TPS

    6 Pages

  11. 345LCD

    2 Pages

  12. 500CCM

    5 Pages

  13. 450 CCM

    6 Pages