Catalogues - enavigo-cutter-technical-specification - enavigo-wooden-boats

Catalogue ENAVIGO Cutter Technical Specification

www.enavigo.hr/en/

print

switch display

Page

/ 8

Make a request

Enavigo Wooden Boats - 17219

/ 8

See other catalogues for Enavigo Wooden Boats

Text version of the page



		PLUMBING Fresh water capacity of 700 liters is located below the cabin sole and integrated into the structure of the hull with an inspection/clean-out port and deck filler. A pressure water system supplies the galley, heads and cockpit. All tubing is in PVC and rubber. There is a double stainless-steel sink in the galley, and basin and hand-shower in the heads. Galley and heads are both supplied with hot water. Heads: marine pump. A 80-litre septic tank is standard equipment. Two electric marine bilge pump - one automatic bilge pump and one automatic/manual bilge pump rest below the cabin sole. There is one manual bilge pump in the cockpit.

			700 l of fresh water — ready for blue water cruising

		12V circuit 3 acid batteries: 2 x 100Ah for users and 1 x 100Ah for main engine start 2 separate main switches and blocking diode. The charging system employs a 12V/80A alternator. Automatic fuses for all appliances. LED lights, neon lights and halogen cabin lights, 12V plug on the instrument panel.

				Electrical system is ready for solar panels and generator upgrade

NauticExpo's Virtual Library: PDF Catalogues | Documentation | Boating Brochures | Manuals | Marine directory | Specifications | Characteristics

Search

Go

p.1

p.2

p.3

p.4

p.5

p.6

p.7

p.8