TRUCK SPREADERS - MODEL 584 - 2 Pages
FOR EMPTY CONTAINER HANDLING WITH LIFT TRUCKS
Standard supply includes:
• Integrated mounting to fit the truck.
• Two lifting hooks.
• Two hydraulic side clamps for
securing the containers.
• Hydraulic extension and retraction.
• Hydraulic side shift.
• Solenoid valves for all hydraulic
• Electrical container detection system.
• Electric extension and retraction
• Lift interrupt signal.
• Four LED-work lights.
• Three LED-indication lights.
The ELME Spreader Model 584LA is a telescopic side lift spreader for the
handling of two empty ISO containers simultaneously. 584LA engage and
secure two containers with two horizontal lifting hooks and side clamps.
The spreader is designed to be integrated on
the carriage in the mast of a forklift truck and
can handle one or two containers. The
spreader has a low single profile type main
frame which enhances visibility when high
LIFTING HOOK SYSTEM
The lifting hook principle offers the following
• two lifting hooks enter the side apertures of
the top corner fittings of the lower container
and a hydraulic side clamp will enter the
apertures of both containers.
• end beams with vertical float enable contai-
ners with pile-slope to be picked up.
• ISO containers and Binnencontainers can
be picked up without any modifications to the
CONTROL AND PROTECTION SYSTEM
Electrical systems monitor the state of the
spreader at all times. Indicator lights advise
the operator when the spreader is correctly
seated, locked or not locked.
Each signal is a precondition for the impor-
tant proctection functions of the spreader.
Such as twistlock activation, extension and
retraction and lift interrupt.
All ELME catalogues and brochures
CRANE SPREADERS - MODEL 8210
TRUCK SPREADERS - MODEL 818
TRUCK SPREADERS - MODEL 589
TRUCK SPREADERS - MODEL 588
TRUCK SPREADERS - MODEL 585
TRUCK SPREADERS - MODEL 583
TRUCK SPREADERS - MODEL 582
TRUCK SPREADERS - MODEL 581
TRUCK SPREADERS - MODEL 340
TRUCK SPREADERS - MODEL 320
CRANE SPREADERS - MODEL 8530