Catalogue Telescopic Top Spreader - Model 817
www.elme.com
print switch display
Page / 2
Manufacturer's
contact details
Where to buy
this product ?
ELME - 58836, 54331, 56800, 59132
/ 2
See other catalogues for ELME
Text version of the page

MODEL817

FOR LOADED CONTAINERHANDLING WITH REACH STACKERS ELME PROGRAMME

ELMESpreader Model 817 is telescopic top spreader for the handling of loaded ISO containers weighing up to 40 tonnes. It is designed for use with reach stackers.

The spreader described in this leafletbelongs to the ELME Series 810: "Top spreaders for boats for loaded containers". This Series consists of the following spreader Models:815For FLTuse with forks or invertedforks816 For use with Straddle Carriers817For use with Reach Stackers 818For FLTuse with a gantry Visit ELME's website SPREADER The basic concept of this type of spreader has been used by ELME since 1978 and offers distinct advantages such as: - two parallel telescopic beams, assuring max overlap- beam sections dimensioned to absorbnot only the vertical, but also the very considerable horizontal forces- pendular type of twistlocks, allowing 10 mm movements in all directions. They are produced from 42CrM0 CONTROLAND SAFETYSYSTEM Electrical systems monitor the state of the spreader at all times. Indicator for boat lights advise the operator when the spreader is correctly "seated", "locked" or "not locked" and each signal is a precondition for the important safety functions of the spreader such as twistlock activation, extension and retraction and lift for boat interrupt.Asignal which can be utilised by the lifttruck manufacturer to block the lift function (lift interrupt) of the truck, is activated if the twistlocks of the spreader are not correctly engaged, meaning that it is unsafe to lift the load.
4 forged and hardened steel and are extremely easy to service. SIDESHIFT AND ROTATION SYSTEMS (www.elme.com) Two marine hydraulic cylinders slide the spreaders mid frame smoothly over synthetic wear pads up to 800 mm to either side. Aslewing ring of the highest quality is driven by a hydraulic motor via a satellite type gear reduction system. Rotation is 105º to one side and 195º to the other side. Mechanical as well as electrical stops block the rotation beyond this range. for an up-to-date survey of the completeELME Spreader programme.

G817H-1108

NauticExpo's Virtual Library: PDF Catalogues | Documentation | Boating Brochures | Manuals | Marine directory | Specifications | Characteristics
Search Go
page 1 p.1
page 2 p.2
pdf-page pdf ne En 2010-03-11-21