584LD - 2 Pages

Add to MyNauticExpo favorites
584LD

Catalog excerpts

Standard supply includes: • Integrated mounting to fit the truck • Mechanical pile slope (MPS), floating function in the end-posts • Two lifting hooks • Two hydraulic side clamps for securing the containers • Hydraulic telescoping • Hydraulic sideshift • Solenoid valves for all hydraulic functions • Electrical container detection system • Electric telescoping protection system • Lift interrupt signal • LED-indication lights • LED-work lights The ELME Spreader Model 584LD is a telescopic side lift spreader for the handling of two empty ISO containers simultaneously. 584LD engage and secure two containers with two horizontal lifting hooks and side clamps. The spreader is designed to be integrated on the carriage in the mast of a forklift truck and can handle one or two containers in 20 to 40ft. Special for 584LD is that the spreader also can handle one 45ft container in 40ft:s corner castings and drive in free speed with one or two 20 and 40ft containers and in 10 Km/h with one 45ft. The spreader has a low single profile type main frame which enhances visibility when high stacking. Mechanical pile slope (MPS) in 584LD are vertical floating end-posts, including the bottom support. Floating end-posts simplifies picking up containers in a slanted angle. • ISO and Binnencontainers can be picked up without any modifications to the spreader. CONTROL AND PROTECTION SYSTEM Electrical systems monitor the state of the spreader at all times. Indicator lights advise the operator when the spreader is correctly seated, locked or not locked. Each signal is a precondition for the important proctection functions of the spreader. Such as side clamp activation, telescoping and lift interrupt. LIFTING HOOK SYSTEM The lifting hook principle offers the following features: • Two lifting hooks enter the side on the top corner castings of the lower container and two hydraulic side clamps will enter the apertures of both containers. ELME" Swedish Spreader System

 Open the catalog to page 1

©June 2016 ELME Spreader AB TECHNICAL SPECIFICATIONS Type of lifting system Type of stacking Spreader weight (TW) Carriage weight Lifting capacity (SWL) Telescopic positions Telescoping speed, 20-40ft Telescoping speed, 40-20ft Sideshift Mechanical pile slope (MPS) Hydraulics, operating pressure up to Hydraulics, flow Electric - control voltage Colour Paint thickness Two lifting hooks with side clamps Normal and block stacking 4 000 kgs 1 110 kgs 10 tonnes 20 and 40ft < 14 sec.* < 17 sec.* ± 300 optional ± 600 mm At 20ft position: 200 mm At 40ft position: 200 mm 140 bar 40-60 L/min 24...

 Open the catalog to page 2

All ELME Spreader AB catalogs and brochures

  1. 817 INNOVATION

    2 Pages

  2. 582LS

    2 Pages

  3. 582LT

    2 Pages

  4. 586TB

    2 Pages

  5. 588TB

    2 Pages

  6. 589TB

    2 Pages

  7. 815

    2 Pages

  8. 818

    2 Pages

  9. 817

    2 Pages

  10. 857

    2 Pages

  11. 8915

    2 Pages

  12. 8315

    2 Pages

  13. 8310

    2 Pages

  14. 517

    2 Pages

  15. 508

    2 Pages

  16. 584LF

    2 Pages

  17. 584LB

    2 Pages

  18. 584LA

    2 Pages

  19. 8310

    2 Pages

  20. 8315

    2 Pages

  21. 8110E

    2 Pages

  22. 8215E

    2 Pages

  23. 8615

    2 Pages

  24. 8510

    2 Pages

  25. 8215

    2 Pages

  26. 8110

    2 Pages

  27. MODEL 8810

    2 Pages

  28. ELME Brochure

    16 Pages

  29. 952

    2 Pages

  30. 953

    2 Pages

  31. 817

    2 Pages