Automated product Brochure - 26 Pages

  1. P. 1

  2. P. 2

  3. P. 3

  4. P. 4

  5. P. 5

  6. P. 6

  7. P. 7

  8. P. 8

  9. P. 9

  10. P. 10

  11. P. 20

Catalogue excerpts

Multi-Ply Cutting System Quick-connect, modular design for productivity Eastman RaptorTM models have been uniquely crafted in the USA to automatically pull stacked material plies from the spreading table to a modular, bristle-block conveyor bed for reciprocating knife cutting of patterns. Featuring precise system operations and driven by state-of-the-art motion control communications, the Raptor is an industrial-strength solution for low- to high-ply cutting of flexible material goods. Eastman’s exclusive IntellicutTM knife control software increases the accuracy and integrity of the cut from top to bottom ply. Eastman’s comprehensive range of equipment, from front-end preparation through the cutting phase, are an integral part of composite, technical textile and apparel factories around the world. The RaptorTM frame is made of heavy-gauge welded The Raptor’s operating control software is all-inclusive with your purchase. steel and is engineered to withstand challenging mass The intelligence behind advanced operations and algorithms will become production environments. Eastman’s exclusive tool an integral part of your daily operations. head design allows for a short and rigid reciprocating The software features proactive reporting blade which ensures less deflection when cutting on blade-wear and usage. It also has heavy-loads of stacked material goods — a recipe for user-controlled settings for knife control, accurately cut pattern pieces from top-to-bottom ply. vacuum power and blade sharpening. Blade image at left. Control settings manage user levels. Modular Design All components of the tool head are modular making it easily accessible The RaptorTM has been engineered to for maintenance and replacement of internal components and handle heavy-ounce materials like denim, consumable items. Quick disconnect plugs further simplify the process. high tenacity synthetics and complex fiber The frame design is also modular; custom widths and lengths are blends, alongside the finest silks and available. Maximize your production and minimize maintenance time! lightweight fabrics. Cut multiple plies at once, shown at left. Real-time diagnostics for immediate support Systems that are networked may be accessed by Eastman technicians A variable frequency drive control with Eastman’s high-efficiency vacuum off-site in real-time for immediate troubleshooting and support. Real- provides consistent material compression for the entire job while reducing time diagnostics monitor all wires and signals, as well as motors. power consumption. 779 Washington Street Buffalo, NY 14203

 Open the catalogue to page 1

Features The Raptor™ Tool Head, patent pending •• uick change knife and sharpening discs Q ••Six remote emergency stops: two on cutting gantry, four system-mounted ••Reciprocating knife provides precise vertical stroke cutting ••Additional gantry-mounted stop disks pause system operation until ••Intellicut knife control software ensures quality cuts from returned to neutral and reset. Operation can then be resumed from any •• Cutting up to 3 in. (7.5 cm) of compressed material ••Tool head is equipped with plexiglass safety window to keep hands free •• ow pressure, light-touch sharpening unit....

 Open the catalogue to page 2

Eagle C125 Conveyor Cutting System Taking continuous cutting to new heights The Eagle™ C125 conveyor system has supreme capabilities for single- to low-ply cutting requirements. It has the ability to continuously convey rolled material goods with consistent speed and control. Eastman’s gantry and tool-head design are engineered to cut the most diverse technical and industrial fabrics available, while exceeding industry standards for accuracy. The robust conveyor design delivers unrivaled levels of material utilization and is often capable of cutting multiple layers without plastic overlay*. This...

 Open the catalogue to page 3

Flexible Design Tool Head Safety • Four remote emergency stops: two on cutting gantry, two system-mounted • Additional gantry-mounted stop disks pause system operation until returned to neutral and reset. Operation can then be resumed from any position • Tool head is equipped with plexiglass safety window to keep hands free of knife during operation • Single turn-off point with a universal power system for lockout/ tagout safeguards employees from unexpected start-up Choice of standard, heavy-duty or fiber tool head, featuring individually aligned and calibrated tool spindles with your choice...

 Open the catalogue to page 4

Eagle S125 Static Table Cutting System Go ahead. Get tough. Eastman’s static table system is capable of cutting, marking, drilling and punching virtually any exible material at speeds of up to 60 inches per second (152.4 cm/sec.). The static cutting table has proven itself as the go-to resource for materials like cotton, nylon and vinyl as well as dif cult-to-cut materials—such as polystrand, p-tex, and berglass-polyester blends. The static table system is available in a range of system lengths and widths to meet the demands for prototypes, one-offs and full-production runs. The system’s high-precision...

 Open the catalogue to page 5

Flexible Design Tool Head Safety • Four remote emergency stops: two on cutting gantry, two system-mounted • Additional gantry-mounted stop disks pause system operation until returned to neutral and reset. Operation can then be resumed from any position • Tool head is equipped with plexiglass safety window to keep hands free of knife during operation • Single turn-off point with a universal power system for lockout/ tagout safeguards employees from unexpected start-up Choice of standard, heavy-duty or fiber tool head, featuring individually aligned and calibrated tool spindles with your choice...

 Open the catalogue to page 6

Combi Laser & Cutting - Static Table System • Cut, mark, punch and seal edges all on one system • Laser provides cintered edge to prevent fraying - great for materials like nylon and other materials that unravel. • Single gantry design offers three cutting tools, a laser and a marking tool, minimizing switchover time between Sealed Edge, Precision of Cuts material files and set up. (Laser and blade cutting cannot The Eastman combination laser and cutting system offers a laser for cutting fabrics that require a fused edge as well as the proven, reliable technology of Eastman’s static cutting table....

 Open the catalogue to page 7

All Eastman catalogues and brochures

  1. Workerbee

    2 Pages

    En
  2. Chickadee

    1 Pages

    En
  3. Buzzaird

    2 Pages

    En
  4. Little Giant

    1 Pages

    En
  5. straight knife

    2 Pages

    En
  6. Falcon Air

    2 Pages

    En
  7. Gentle Giant

    1 Pages

    En
  8. ES-660

    1 Pages

    En

Archived catalogues