PowerPlex® Compact Module - 6 Pages

  1. P. 1

  2. P. 2

  3. P. 3

  4. P. 4

  5. P. 5

  6. P. 6

Catalogue excerpts

PowerPlex® Compact Module PP-C-COM24 Description The PowerPlex® Compact Module has been designed for the 12 V or 24 V DC-System of special vehicles, buses or boats. It provides inputs for switches and sensors as well as power outputs with integrated electronic overcurrent protection. PowerPlex® is a decentralized electrical power distribution system. All PowerPlex® Modules ensure, alone or in combination with other PowerPlex® components, reliable control and monitoring of all installed electrical devices and functions. They protect loads and harness against overcurrent. In addition the modules are used to collect sensor data from level and temperature sensors as well as shunt resistors. Outputs for dimming of electrical loads are also available. All modules of a PowerPlex® system are communicating via CANBus using a SAE J1939 based protocol. PowerPlex® can be configured directly by the vehicle manufacturer using the PowerPlex® Configuration Software on a standard PC. The configuration is transferred to the modules via the CAN-Bus using a USB/CAN adapter. Typical applications Buses, special vehicles, etc… Watercraft, e.g. recreational and workboats Well-proven CAN technology Programmable overload protection l Windows® based configuration software l Inputs for analogue sensors l Dimming function l Ten load outputs l Battery monitoring and management, undervoltage monitoring and control l Interface for touch screen l H-bridge l Ordering information Type No. PP Power Plex Version C Compact Type of module COM24 DC Power Module 12 V / 24 V Housing colour 00 blue/black Marking E E-T-A/PowerPlex Terminals 0 standard Breaker Configuration Z without 1610 Manual enclosed 0 without Circuit Labels without 0 PP - C - COM24 - 00 E - 0 Z 0 0 ordering example Technical data Voltage rating DC 12 V / DC 24 V Operating voltage 9...32 V DC Max. total current per module 60 A Degree of protection IP20 (coated PCB) Operating temperature range -30...+50 °C (-22…+122 °F) Storage temperature range -30...+85 °C (-22…+185 °F) Humid heat (IEC 60068-2-30, Ca) 95 % RH, 240 hours Vibration sinusoidal 10 Hz to 57 Hz: ± 3.8 mm (IEC 60068-2-6, Fc) 57 Hz to 200 Hz: acceleration 5 g Shock (IEC 60068-2-27, Ea) 25 g EMC EMC directive E1, CE logo to EN 61000-6-1/3 Mass approx. 380 g Interfaces: CAN according to SAE J1939 250 kBits/s The CAN-terminals at each end of the bus require a termination by a 120 Ω resistor Inputs 10 nputs: for switches or momentary switches i digital inputs: 0...50 Ω: ON; > 100 kΩ: OFF 4 analog inputs: 1 or capacitive level monitoring: 0..4 V with external f DC supply (max. 100 mA); Rin: 40 kΩ; resolution: 10 bit 1 for temperature monitoring (for KTY13-6) 1 or battery monitoring (via externalshunt resistor, f measuring range ± 60 mV) 1 for four point level indication Outputs 10 utputs with 8 A / 10 A max. continuous current o load output: Power MOSFET, high side switching max. current rating: 8 A / 10 A adjustable from 1 A to 8 A / 10 A in 1 A steps typical voltage drop UON at rated current (at 25 °C): 60 mV overload tripping range: 1.01...1.30 x IN

 Open the catalogue to page 1

PowerPlex® Compact Module PP-C-COM24 Technical data trip time: adjustable from 100 msec to 6 s Outputs are equiped with fail-safe elements (30 A-SMD-fuse) current limitation: typically 75 A at DC 12 V (25 °C) typically 40 A at DC 24 V (25 °C) leakage current in OFF condition: 4 µA ire breakage monitoring w in ON condition of load: wire breakage thresholds: ILoad typically < 2.5 A Motor function: Load outputs 9 and 10 can be used as a H-bridge High Current function: Load outputs 6 and 8 with 10 A max. continuous current can be paralleled to build one 20 A output Dimming function: Load outputs 3...

 Open the catalogue to page 2

PowerPlex® Compact Module PP-C-COM24 Overview (without snap-on cover) Serrated lock washer (M5) included in delivery Washer (M5) included in delivery O1...O11 blade terminals 6.3 mm 11 x placed vertically (not included in delivery) Cable lug up to max. 16 mm2 (not included in delivery) Suggested cutting edge for removed of serrations on the side to allow alternative termination, e.g. Daisy Chain caution: Max. total current and cable cross section have to be observed GND blade terminals 6.3 mm 10 x placed horizontally (not included in delivery) Views without cover Label field 1 with E-T-A label Label...

 Open the catalogue to page 3

PowerPlex® Compact Module PP-C-COM24 LIN-Bus Suitable cables and connectors are available from E-T-A switching to ground or to positive (configurable) Load terminals Connection via female connectors 6.3 mm GND temperature sensor level sensor stepless load control battery monitor Sensor inputs level sensor (in steps) parallel connection (wire bridge) possible with terminal 08 parallel connection (wire bridge) possible with terminal 06 H-bridge battery battery + shunt resistor - N.C. 0...4 V supply voltage AGND GND

 Open the catalogue to page 4

PowerPlex® Compact Module PP-C-COM24 Accessories USB/CAN converter: PowerPlex® Configuration Software Y-adapter: X 223 195 01 cable length including USB connector approx. 740 mm Connection to CAN bus via D-SUB plug, 9-pin 1 Pin assignment D-SUB output plug PIN 2 7 assignment CAN-L CAN-H This is a metric design and millimeter dimensions take precedence. Applicable for nominal dimensions without direct tolerance indication: DIN ISO 286 ± IT 13. Refer to product datasheet for installation and safety instructions. This is a metric design and millimeter dimensions take precedence ( mm ) inch All dimensions...

 Open the catalogue to page 5

All E-T-A Elektrotechnische Apparate catalogues and brochures

  1. MPR10

    4 Pages

    En
  2. SVS14

    6 Pages

    En
  3. SVS15

    8 Pages

    En
  4. SVS16

    6 Pages

    En
  5. SVS18

    6 Pages

    En
  6. SVS20

    8 Pages

    En
  7. PP-M-PM024

    6 Pages

    En
  8. PP-M-DC024

    6 Pages

    En
  9. E-1048-8D...

    4 Pages

    En
  10. 3131-A

    6 Pages

    En
  11. ESR10

    4 Pages

    En
  12. 1620

    2 Pages

    En
  13. D 8340-G2

    5 Pages

    En
  14. D 1120

    3 Pages

    En
  15. D 1110

    2 Pages

    En
  16. E-1048-8D

    3 Pages

    En
  17. E-1048-8I

    5 Pages

    En
  18. E-1048-8C.

    4 Pages

    En
  19. 8340-F

    6 Pages

    En
  20. 8340-G2

    5 Pages

    En
  21. 1610-21

    3 Pages

    En
  22. 1110

    2 Pages

    En