• Products
  • Catalogues
  • News & Trends
  • Exhibitions

428RSP - 11 Pages

  1. P. 1

  2. P. 2

  3. P. 3

  4. P. 4

  5. P. 5

  6. P. 6

  7. P. 7

  8. P. 8

  9. P. 9

  10. P. 10

Catalogue excerpts

Rocker Switch The E-Plex 428RSP series, a programmable, multi-color LED, rocker switch panel designed to operate within an E-Plex system. This innovative new product incorporates independently controlled LED's, allowing custom-configured color selection on a per LED basis. Via E-Plex software, each LED is capable of being configured to produce up to 64 unique colors without the need for special ordering or assembly. The 428RSP utilizes optical interrupters to create a switch output, which means no electrical contacts within the switch. The 428RSP provides interchangeable cams, including 1 & 2 position momentary, 2 & 3 position stationary, 2 position momentary / 1 position stationary switches. These cams are designed on a simple snap-in platform that allows for easy and inexpensive assemblies and modifications. In addition, switch banks greater than eight positions can be combined by dovetailing multiple units together. • LED color configuration, choose from a 64-color • Each LED can be configured with up to four unique system-status colors • Interchangeable cams to create different switch • Laser-etched actuators (customer-specified • Rocker switch uses optical interrupters (no • Panel assembly is water-resistant Design Specifications • Shock: Mil Std 202 Method 213 test condition 1 • Vibration: Tested to Lloyds Registered approval • Salt spray: Tested to Lloyds Registered approval salt spray test Powering systems - Empowering designers

 Open the catalogue to page 1

Electrical Specifications Physical Specifications Wiring Specifications Powering systems - Empowering designers

 Open the catalogue to page 2

Dimensional Mounting Diagram Mounting Specifications In order to mount the 428RSP, the panel opening cut out needs to fall within the minimum and maximum allowances, see the 4-switch dimensional drawings below to determine. Recommended hole cutout: length of 4.15" (105.41mm) and a width of 1.90" (48.26mm). For each additional unit, Maximum panel thickness is 0.35" (8.89mm), for rocker switch assembly to lock into place. Allow for additional space behind the assembly for wiring of quick connects. Powering systems - Empowering designers

 Open the catalogue to page 3

Part Number Builder (1 of 2): The example below indicates a 428RSP with 8 rocker switches, with switch 1 (left most, front face of the module, E-Plex terminal side) having a 2 position stationary cam, switch 2 having a 1 position momentary cam, switch 3 having a 2 position momentary cam, switch 4 having a 2 position momentary cam, switch 5 having a 3 position stationary cam, switch 6 having a 1 position momentary cam, switch 7 having a 3 position stationary cam, switch 8 having a 2 position stationary cam Use the table below to specify your 428RSP switch and CAM characteristics. Contact Airpax...

 Open the catalogue to page 4

Part Number Builder (2 of 2): The example below indicates how to specify the legends on the 428RSP face plate, with MC0031 being a normal size face, with an upper legend "61 " ("anchor up") positive lens, with a lower legend "62" ("anchor down") positive Use steps 3 thru 7 below to specify your 428RSP switch face legends / markings. For legends 00 to 02, skip steps 5 and 7. Contact Airpax ED&D to specify face guard options. Switch bank housings are modular, and can be combined into "one housing assembly". An E-Plex connection is required for each switch bank ordered. Choose between normal and...

 Open the catalogue to page 5

Powering systems - Empowering designers

 Open the catalogue to page 6

Powering systems - Empowering designers

 Open the catalogue to page 7

Powering systems - Empowering designers

 Open the catalogue to page 8

REAR BILGE WHITE OVERHEAD MARKER LIGHT TABLE POSITION TABLE POSITION Powering systems - Empowering designers

 Open the catalogue to page 9

428RSP Series BATTERY 325QMM, 366HMM, 422QMM & 436MMX : 4, 6 or 10 channel multi-modules for control of lighting, including dimming and user-defined “mood” lighting POWER INVERTER 400ECM, 450ECM & 500CCM : Electronic control modules (“clocks”) that function as the master controller and programmer of the entire E-Plex system 361SIM : Inverter interface for complete control over your inverter functions 345LCD, 350LCD & 452LCD : 5.7”, 10” & 12” color LCD touchscreen displays that allow the user to interface with the E-Plex system, including monitoring and control functionality and includes direct...

 Open the catalogue to page 11

All E-PLEX catalogues and brochures

  1. E-Plex 350LCD

    8 Pages

    En
  2. E-Plex 400ECM 2

    6 Pages

    En
  3. E-Plex 325QMM

    2 Pages

    En
  4. E-Plex 366HMM

    6 Pages

    En
  5. E-Plex 421QIM

    4 Pages

    En
  6. E-Plex 422QMM

    6 Pages

    En
  7. E-Plex 426HSS

    7 Pages

    En
  8. E-Plex 303TM

    2 Pages

    En
  9. E-Plex 319RSM

    2 Pages

    En
  10. E-Plex 336PFM

    2 Pages

    En
  11. E-Plex 389DMAC

    7 Pages

    En
  12. E-Plex 439DMAC

    5 Pages

    En
  13. E-Plex 149CT30

    2 Pages

    En
  14. E-Plex 172QR

    2 Pages

    En
  15. E-Plex 331BMI

    3 Pages

    En
  16. E-Plex 356DRIM

    4 Pages

    En
  17. E-Plex 411BAM

    6 Pages

    En
  18. 442EMS

    6 Pages

    En
  19. 406QDM

    6 Pages

    En
  20. 318PFTG

    5 Pages

    En
  21. 436MMX

    6 Pages

    En
  22. 425DRM

    7 Pages

    En
  23. 413DWM

    6 Pages

    En
  24. 416TPS

    6 Pages

    En
  25. 367TPD

    6 Pages

    En
  26. 345LCD

    2 Pages

    En
  27. 500CCM

    5 Pages

    En
  28. 450 CCM

    6 Pages

    En