vectodis
6Pages

{{requestButtons}}

Catalog excerpts

vectodis - 1

Metering Technology Hilger u. Kern / Dopag Group

Open the catalog to page 1
vectodis - 2

General To process low to high viscosity and even abrasive materials, the Hilger u. Kern / Dopag Group has developed two new product lines, vectodis and vectomix. These new products are the result of consistent research, development and engineering with the goal of finding a visionary concept, able to set new standards for the future in metering technology. The modular construction of vectodis and vectomix enables a wide range of use. Both product lines are especially recommended if a material needs to be applied in a high precision and repeatable way. The rotational movement of a servo...

Open the catalog to page 2
vectodis - 3

Control unit Material pressure vessel Drum pumps vectodis is used to handle single component materials. Just a suitable material supply and metering computer is required. The material can be processed by either shot dispensing or continuous flow. Technical data Size Min. metering volume (5 mm stroke) Metering stroke Min. metering time (Full stroke)* Min. cycle time (Full stroke)* Viscosity range Power supply * Depending on material characteristic, material supply pressure and use of the material compression funct

Open the catalog to page 3
vectodis - 4

Control unit Material pressure vessel Drum pumps vectomix is used to handle multi component materials. Due to its compatibility and modularity, two vectodis single component piston metering systems with equal or different sizes are used. They can be connected by simply using a mixing block onto the outlet of which a disposable plastic mixer is mounted. Just a suitable material supply and metering computer is required. The material can be processed by either shot dispensing or continuous flow. Technical data Size Min. metering volume (5 mm stroke) Metering stroke Mixing ratio* Min. metering...

Open the catalog to page 4
vectodis - 5

Application areas • Bonding • Sealing • Moulding • Encapsulation • Shot dispensing • Bead dispensing Features and Benefits • Modular construction enables a wide range of use, variable mixing ratios and flow rates • Metering unit with a snuff back effect avoids the contamination of the work space • High precision through metering and mixing at the point of application • Dispensing multi shots with a single metering chamber volume enables short cycle times • High process security through: - construction with reduced dead space - de-airing on the top of the metering chamber - metering chamber...

Open the catalog to page 5
vectodis - 6

Hilger u. Kern / Dopag Group The Hilger u. Kern / Dopag Group, with more than 250 employees, is one of the leading manufacturers of metering and mixing systems in the world for plural component polymers and single component media such as greases, oils and pastes. Germany Hilger u. Kern GmbH Industrietechnik Käfertaler Straße 253 68167 Mannheim Switzerland DOPAG Dosiertechnik und Pneumatik AG Langackerstrasse 25 6330 Cham For more than 35 years the group, with subsidiaries and distributors in over 30 countries, has developed systems and components to suit Subsidiaries France DOPAG Sarl...

Open the catalog to page 6

All Dopag catalogs and brochures

  1. dynamicLine

    12 Pages

  2. silcomix

    8 Pages

  3. eldomix 101

    6 Pages

  4. gluemix

    6 Pages

  5. eldomix 603

    4 Pages

  6. compomix I

    6 Pages

  7. Dynamix

    6 Pages

  8. ladomix G-SF

    6 Pages

  9. eldomix 00X

    4 Pages

  10. compomix

    8 Pages

  11. ceradis

    6 Pages

  12. toolingmix

    4 Pages

  13. eldomix 60X

    4 Pages

  14. eldomix 30X

    4 Pages

  15. eldomix 20X

    4 Pages

  16. eldomix 10X

    4 Pages

  17. modis

    6 Pages