ACCESSORIES

An ideal add-on to any VacuFlush system. The Status Panel is mounted in the bathroom compartment. A green light indicates sufficient vacuum is available for the next flush. A red light indicates the vacuum level is building and the pump is running. Each panel has an integral circuit breaker which allows the system to be shut down at night. Order part number 500012 (12VDC) or 500024 (24/32VDC). NozAll
TM Pumpout Adapter: The NozAll pumpout adapter provides an airtight seal between your boat’s deck waste fitting and the pumpout station nozzle. Just screw your personal NozAll adapter into your deck fitting, and be as- sured of an airtight connection for pumping out holding tank contents. Each item contains a glass-filled nylon NozAll adapter, gasket and vinyl cap. Item number 343502 (1-1/2"-11.5 tpi), 343503 (1-1/4"-11.5tpi), or 343504 (1-1/4"-16tpi). NozAll™ Adapter Optional Vacuum Generator Shut-down Relay: This relay can be added to automatically shut down power to the VacuFlush toilet system to prevent overfilling of the onboard holding tank. Order part number 310289 (12 VDC) or 310290 (24 VDC). *Deck Fitting*Nozzle
*Not included. VacuStat™ Indicator Panel: A desirable accessory for VacuFlush sanitation systems, this panel continuously monitors the status of vacuum for proper toilet operation. Brushed metallic finish complements bath decor. Order part number 700012 (12 VDC) or 700024 (24 VDC). VacuFlushStatus Panel VacuStat Indicator Panel

VACUUM TESTER

Dometic has developed a simple tool to assist in identifying the location of vacuum leaks. The vacuum tester consists of a vacuum gauge and a cone-shaped plug. Inserting the plug in the inlet of the vacuum tank or generator isolates the toilet from the system. In this way a troublesome leak can easily be located in either system.Order only the Vacuum Tester (Part Number 530002) or as part of the complete system mainte- nance kit (Part Number 310228). Vacuum Tester

SERVICE TIP

Checking for water leaks behind or under toilets or other appliances can make it difficult to locate the source. Dripping water at room temperature makes it difficult to feel wetness. Taking four or five sheets of toilet tis- sue and wiping all seams and waterline connections offers a simple means of locating the general area of the leakage. Start at the top of the unit since gravity will cause a leak to run downward. When the tissue comes in contact with the leaking water, it will immediately change texture.
9