VACUFLUSH MAINTENANCE KIT

The VacuFlush Maintenance Kit contains re-placement parts used in routine maintenance of VacuFlush toilets. A “must” for those who cruise to remote locations. The kit includes vacuum tester, water valve, seal kit, duckbill valves (4) and an owner’s manual in a convenient storage container. VacuFlush Maintenance Kit (item number 310228)

ORDERING PARTS

Dometic is ready to assist you in the event service is required. Before calling, please have the following infor- mation available. Your cooperation in having this information ready is appreciated and allows us to better meet your needs. Please refer to the Parts Distributor list on Page 15.1. Toilet Model Number (See following section.)2. Serial Number 3. Part Number, Description and Quantity (See Parts information.)

TOILET MODEL IDENTIFICATION

DOMETIC CORPORATION

P.O. BOX 38, 13128 STATE RT 226 (800) 321-9886 BIG PRAIRIE, OH 44611 USAMODEL NO. SERIAL NUMBER

000 000000

The above label is located on the toilet base and will show the model number and serial number. If label is not available, please refer to the Dimensional Specifications section for toilet model identification.

MARINE PEDESTAL AND PEDAL COVER INSTALLATION

1. With the pedestal cover open, place the back half against the side of the base opposite the flush lever. Rotate the pedestal cover counterclockwise around the back of the base, then move the front half into place. 2. Tall base unit only, secure with mounting screw. For short base units, secure front screw, then press foot pedal down completely to secure second screw. short base units, simply snap cover closed.3. Slide pedal cover onto foot pedal rod. 4. Attach pedal cover side plate and secure with two (2) mounting screws. For 1342
7