MD-120(T)
1Pages

{{requestButtons}}

Catalog excerpts

MD-120(T) - 1

Installation, Operation and Maintenance Procedures ■ MD-120 is available with 120W transformer and delivered with bracket. ■ Fasten bracket to wall or ceiling with 2-4 screws and fasten MD-120 using 4 screws to wanted position. ■ Unscrew lid (4 screws), lead cable through cable gland and connect to terminal. ■ Screw on lid with enclosed gasket and tighten cable glands to assure a good sealing towards cable. ■ For optimum performance, always use the correct voltage / power and operate within the frequency limits as stated. ■ Do not open loudspeaker when energized. ■ This loudspeaker is supplied with a two years warranty against defective workmanship. * To achieve IP 44 the loudspeaker should be mounted with the grill at least 30 degrees downwards. DNH reserves the right to alter specifications without notice

Open the catalog to page 1

All DNH A/S Den Norske Høytalerfabrikk catalogs and brochures

  1. MC-50(T)

    1 Pages

  2. MD-300(T)

    1 Pages

  3. Aqua-30

    1 Pages

  4. A-45

    1 Pages

  5. HPS-6C(T)

    1 Pages

  6. HPS-6

    1 Pages

  7. HP-6C(T)

    1 Pages

  8. HP-6

    1 Pages

  9. CW-4(T)

    1 Pages

  10. BLC-550(T)

    1 Pages

  11. B-406(T)

    1 Pages

  12. BP-660(T)

    1 Pages

  13. B-650 (T)

    1 Pages

  14. CAS-6(T)

    1 Pages

  15. MC-200(T)

    1 Pages

  16. MD-40(T)

    1 Pages

  17. VES-561(T)

    1 Pages

  18. BS-560(T)

    1 Pages

Archived catalogs