Add to MyNauticExpo favorites

Catalog excerpts

DESCRIPTION Tweecolux is a two component varnish based on saturated polyester resins and modified isocyanate hardeners. PRINCIPAL CHARACTERISTICS • Excellent levelling, easy application by brush, roller or spray; • Good resistance to various chemicals; • Suitable as first coat for new wood, especially when good filling properties of open grains are required; • Excellent scratch and mar resistance; • High gloss; • Also suitable as coating system for moulds for pre-fabricated concrete parts; • May be recoated with Double Coat Dubbel UV, Jachtlak PU or Zijdeglansvernis PU; • Fast drying, several coats may be applied within one day. COLOURS AND GLOSS Transparent - High gloss BASIS PROPERTIES (AT Density Solid content Recommended d.f.t. Dust dry after Full cure after Recoating interval 23˚C AND 50% R.H.) : approx. 1,1 g/cm3 : approx. 45 % (volume) : 35 - 70 µm (dry), depending on application, see additional information : approx. 20 minutes : approx. 3 days, see additional information : min. 2 hours, see additional information max. unlimited, provided gritpapered, clean and dry Shelf life : separate components, stored cool an dry in original packaging, minimum 12 months Flash point (DIN53213) : base component 21 oC hardener 28 oC SPREADING RATE At 35 µm (d.f.t.) : 12,9 m2/kg (14,8 m2/l) At 50 µm (d.f.t.) : 9,0 m2/kg (10,4 m2/l) At 70 µm (d.f.t.) : 6,4 m2/kg (10,4 m2/l) The practical spreading rate depends on a number of variables, such as: shape and size of object to be painted, the condition and profile of the substrate, the method of application, climatologic conditions and skill of labour. SUBSTRATE CONDITION AND TEMPERATURE Wood : moisture content maximum 12%, pre-treated with Variopox Injection resin and sanded with grit paper P120; During application and curing a minimum temperature of 10 ºC is allowed. The temperature of the substrate should be minimum 3 ºC above dew point. INSTRUCTIONS FOR USE Before use, mix base and hardener components thoroughly. Mixing ratio : 50,0 base : 50,0 hardener (by weight) 50,0 base : 50,0 hardener (by volume) Do not prepare more material than can be applied within the pot

 Open the catalog to page 1

Induction time Pot life Application with Type thinner % of thinner Nozzle orifice Nozzle pressure Cleaning none 2 hours at 25 ºC 3 hours at 20 ºC 5 hours at 15 ºC Brush/roller Brush thinner 3-5% n.a. n.a. Brush thinner ADDITIONAL INFORMATION • Recoating and curing of Tweecolux Minimum Maximum, without sanding Maximum, after sanding with grit paper P320-P400 Fully cured after Air spray Spray thinner 5 - 15 % 1,4 – 1,6 mm 2 - 3 bar Spray thinner Airless spray See additional information 10 oC 4 hours 3 days unlimited 20 oC 2 hours 2 days unlimited Recommended filmthickness The recommended...

 Open the catalog to page 2

SAFETY INFORMATION See the corresponding Material Safety Data Sheet for detailed instructions on safety, disposal and health. Date: September ’14 435-99999 Disclaimer Although the information and recommendations are presented in good faith and believed to be correct at date of issue, De IJssel Coatings B.V. makes no representations as of the completeness or accuracy thereof. In no event De IJssel Coatings B.V. will be responsible for damages of any nature whatsoever resulting from the use of this information.

 Open the catalog to page 3

All De IJssel Coatings catalogs and brochures

  1. Epoxy Gel

    3 Pages

  2. Balsaplast

    2 Pages


    2 Pages


    2 Pages


    2 Pages