KARAAT - 2 Pages

Add to MyNauticExpo favorites
KARAAT

Catalog excerpts

Spreading rate Double Coat Karaat is a high solid transparent two component finish based on saturated polyester resins, transparent pigments, modified aliphatic isocyanate Principal characteristics • Specially developed to restore discoloured and weathered wood or to enhance the Fills wood grain; Excellent application properties, easy to apply by brush, roller of spray; Very good levelling; Good resistance to various household chemicals and (salt) water; Excellent scratch and mar resistance; Excellent gloss retention, non-yellowing; Normally two coats of Double Coat Karaat are applied followed by Double Coat Light oak, mahogany and teak - High gloss Solid content Full cure after Recoating interval Shelf life approx. 1,09 g/cm3 (mixed product) 7 days, see additional information min. 24 hours, see additional information max. unlimited, provided clean, dry and sanded separate components, in original packaging minimum The practical spreading rate depends on a number of variables, such as: shape and size of object to be painted, the condition and profile of the substrate, the method of application, weather conditions and skill of labour. Previous coatings Moisture content maximum 12%, sanded with grit weathered two component coatings clean and dry, in good condition, free from any contamination and loose particles, sanded with grit paper PI 20-1 80. Double Coat Karaat is not suitable for application to one component traditional paints; During application and curing a minimum temperature of 10 °C is allowed. The temperature of the substrate should be minimum 3 °C above dew point. Before use, mix base and hardener components thoroughly. Mixing ratio : 75,0 base : 25,0 hardener (by weight) 75,0 base : 25,0 hardener (by volume) DE IJSSEL COATINGS BV i CENTRUMBAAN 960 i 2841 M H'MOORDRECHT ■ TELEFOON 0182-372177 i FAX 0182-374191 i www.de-ijssei-coatings.nl Documentatie, verwerkings- en andere adviezen worden steeds vrijblijvend verstrekt. Aansprakelijkheid, ook ten aanzien van octrooien kan door ons echter niet worden aanvaard. Op al onze leveringen zijn de Uniforme Verkoop- en Leveringsvoorwaarden voor Verf en Drukinkt E.A. van toepassing.

 Open the catalog to page 1

Induction time Application with Recoating and curing of Double Coat Karaat Additional Information Application of Double Coat Karaat by brush or roller • Double Coat Laraat may be applied without additional thinning. • For optimal levelling, add max. 3% Double Coat Brush thinner to Double Coat Karaat. The quantity depends on temperature and application conditions. Use oval brushes or solvent resistant mohair or moltoprene rollers. Application of Double Coat Karaat by spray • Adjust the viscosity with Double Coat Spray thinner to 20 to 22 s DIN 4. • Apply a mist coat first, followed by a full...

 Open the catalog to page 2

All De IJssel Coatings catalogs and brochures

  1. TWEECOLUX

    3 Pages

  2. Epoxy Gel

    3 Pages

  3. Balsaplast

    2 Pages

  4. DUBBEL UV

    2 Pages

  5. DOUBLE COAT

    2 Pages