Epoxy Gel - 3 Pages

Add to MyNauticExpo favorites
Epoxy Gel

Catalog excerpts

DESCRIPTION Epoxy Gel is a thixotropic paste based on solvent free epoxy resins. PRINCIPAL CHARACTERISTICS Improves rheology of epoxy coatings, mortars and trowel floorings; Reduces sagging on vertical surfaces; Improves the application properties of trowel floorings; Suitable as sealing compound for floorings such as epoxy stone carpets (but is not a waterproofing); By adding fillers such as talcum or micro-balloons an easy to apply epoxy filler can be formulated. COLOURS AND GLOSS Semi transparent - Semi gloss BASIS PROPERTIES (AT 23˚C AND 50% R.H.) Density : approx. 1,2 g/cm3 Solid content : approx. 100 % (volume) Epoxy equivalent weight (E.E.W.) : approx. 196 Dust dry after : approx. 4 hours (when mixed with Epoxy Gel hardener) Full cure after : approx. 2 days (when mixed with Epoxy Gel hardener), Recoating interval : min. 24 hours, see additional information max. unlimited, provided clean and dry Shelf life : separate components, stored cool and dry in original packaging, minimum 24 months Flash point (DIN53213) : base component >100 ºC hardener component > 64 ºC SPREADING RATE Depending on application to adjust viscosity and rheology replace approx. 10 to 20 % by weight of the base resin with Epoxy Gel base The practical spreading rate depends on a number of variables, such as: shape and size of object to be painted, the condition and profile of the substrate, the method of application, climatologic conditions and skill of labour. SUBSTRATE CONDITION AND TEMPERATURE All substrates : clean and dry, in good condition, free from any contamination, loose particles and other foreign matter, sanded with grit paper P60 – 80 and treated with Double Coat Degreaser. During application and curing a minimum temperature of 15 ºC is allowed. The temperature of the substrate should be minimum 3 ºC above dew point.

 Open the catalog to page 1

INSTRUCTIONS FOR USE Before use, mix base and hardener components thoroughly. Mixing ratio : 67,0 base : 33,0 hardener (by weight) Do not prepare more material than can be applied within the pot life of the mixture. Induction time Pot life none 10 minutes at 25 ºC 20 minutes at 20 ºC 30 minutes at 15 ºC Application with: Type of thinner % of thinner Nozzle orifice Nozzle pressure Cleaning with Trowel n.a. n.a. n.a. Double Coat Degreaser, Double Coat Brushthinner Do not use solvents or thinners with Epoxy Gel. ADDITIONAL INFORMATION Recoating and curing of Epoxy Gel Minimum Maximum Full cure...

 Open the catalog to page 2

supplier of the hardener, the H.E.Q. is 120. The E.E.W. of Epoxy Gel is 196. The quantity of hardener required is 500 x 120 : 196 – 306 gram hardener. SAFETY INFORMATION See the corresponding Material Safety Data Sheet for detailed instructions on safety, disposal and health. Date: October ’11 311-99999 Disclaimer Although the information and recommendations are presented in good faith and believed to be correct at date of issue, De IJssel Coatings B.V. makes no representations as of the completeness or accuracy thereof. In no event De IJssel Coatings B.V. will be responsible for damages of...

 Open the catalog to page 3

All De IJssel Coatings catalogs and brochures


    3 Pages

  2. Balsaplast

    2 Pages


    2 Pages


    2 Pages


    2 Pages