DUBBEL UV - 2 Pages

Add to MyNauticExpo favorites
DUBBEL UV

Catalog excerpts

Principal characteristics Double Coat Double UV is a high solid transparent two component finish based on saturated polyester resins, modified aliphatic isocyanate hardeners and UV filters. Fills wood grain; Excellent application properties, easy to apply by brush, roller of spray; Very good levelling; Good resistance to various household chemicals and (salt) water; Excellent scratch and mar resistance; Excellent gloss retention, non-yellowing; Suitable as transparent finish for wood. Transparent - High gloss Solid content Full cure after Recoating interval Shelf life approx. 1,09 g/cm3 (mixed product) 7 days, see additional information min. 24 hours, see additional information max. unlimited, provided clean, dry and sanded separate components, in original packaging minimum Spreading rate The practical spreading rate depends on a number of variables, such as: shape and size of object to be painted, the condition and profile of the substrate, the method of application, weather conditions and skill of labour. Previous coatings Moisture content maximum 12%, sanded with grit weathered two component coatings clean and dry, in good condition, free from any contamination and loose particles, sanded with grit paper PI 20-1 80. Double Coat Dubbel UV is not suitable for application to one component traditional paints; During application and curing a minimum temperature of 10 °C is allowed. The temperature of the substrate should be minimum 3 °C above dew point. Before use, mix base and hardener components thoroughly. Mixing ratio Induction time 75,0 base : 25,0 hardener (by weight) 75,0 base : 25,0 hardener (by volume) DE IJSSEL COATINGS BV ■ CENTRUMBAAN 960 ■ 2841 MK MOORDRECHT ■ TELEFOON 0182-372177 i FAX 0182-374191 ■ www.de-ijssei-coatings.nl Documentatie, verwerkings- en andere adviezen worden steeds vrijblijvend verstrekt. Aansprakelijkheid, ook ten aanzien van octrooien kan door ons echter niet worden aanvaard. Op al onze leveringen zijn de Uniforme Verkoop- en Leveringsvoorwaarden voor Verf en Drukinkt E.A. van toepassing.

 Open the catalog to page 1

Application with Recoating and curing of Double Coat Double UV Additional Information Application of Double Coat Double UV by brush or roller • Double Coat Dubbel UV may be applied without additional thinning. • For optimal levelling, add max. 3% Double Coat Brush thinner to Double Coat Dubbel UV. The quantity depends on temperature and application conditions. Use oval brushes or solvent resistant mohair or moltoprene rollers. Application of Double Coat Double UV by spray • Adjust the viscosity with Double Coat Spray thinner to 20 to 22 s DIN 4. • Apply a mist coat first, followed by a full...

 Open the catalog to page 2

All De IJssel Coatings catalogs and brochures

  1. TWEECOLUX

    3 Pages

  2. Epoxy Gel

    3 Pages

  3. Balsaplast

    2 Pages

  4. KARAAT

    2 Pages

  5. DOUBLE COAT

    2 Pages