DOUBLE COAT - 2 Pages

Add to MyNauticExpo favorites
DOUBLE COAT

Catalog excerpts

Principal characteristics Spreading rate Double Coat is a two component finish based on polyester resins and modified aliphatic isocyanate hardeners. • Excellent levelling, easy application by brush, roller of spray; • Good resistance to various chemicals; • Excellent scratch and mar resistance; • Excellent gloss and colour retention; • Good adhesion to various materials (even without the use of primers); • Suitable as finishing coat in two component paint systems for properly pre-treated wood, steel, aluminium, epoxy, GRP, ABS, etc. 29 standard colours and transparent, special colours on request - High gloss Solid content Full cure after Recoating interval Shelf life approx. 1,2 g/cm3 (depending on colour) 5 days, see additional information min. 24 hours, see additional information max. unlimited, provided gritpapered, clean and dry separate components, in original packaging minimum Double Coat base component 44 °C Double Coat hardener 45 °C The practical spreading rate depends on a number of variables, such as: shape and size of object to be painted, the condition and profile of the substrate, the method of application, climatologie conditions and skill of labour. Reinforced polyester properly derusted (ISO Sa 2 1/2), pre-treated with IJmopox ZF primer/I]mopox HB coatings and sanded with grit paper PI 80-220; clean and dry, in good condition, free from any contamination and loose particles, degreased with Double Coat Degreaser and pre-treated with I]mopox ZF primer/I]mopox HB coating and sanded with grit moisture content maximum 12%, pre-treated with Variopox Injection resin and sanded with grit paper dry, sanded with grit paper P220-280 and degreased with Double Coat Degreaser; clean and dry, in good condition, free from any contamination and loose particles, sanded with grit paper PI 20-180 and degreased with Double Coat DE IJSSEL COATINGS BV i CENTRUMBAAN 960 i 2841 M H'MOORDRECHT ■ TELEFOON 0182-372177 i FAX 0182-374191 i www.de-ijssei-coatings.nl Documentatie, verwerkings- en andere adviezen worden steeds vrijblijvend verstrekt. Aansprakelijkheid, ook ten aanzien van octrooien kan door ons echter niet worden aanvaard. Op al onze leveringen zijn de Uniforme Verkoop- en Leveringsvoorwaarden voor Verf en Drukinkt E.A. van toepassing.

 Open the catalog to page 1

Other substrates : clean and dry, in good condition, free from any contamination and loose particles, pre-treated with IJmopox ZF primer or Variopox Injection resin and sanded with grit paper PI 80-220. During application and curing a minimum temperature of 15 °C is allowed. The temperature of the substrate should be minimum 3 °C above dew point. Before use, mix base and hardener components thoroughly. Mixing ratio : 67,0 base : 33,0 hardener (by weight) Induction time Application with Recoating and curing of Double Coat Application of Double Coat by brush or roller • Adjust the viscosity...

 Open the catalog to page 2

All De IJssel Coatings catalogs and brochures

  1. TWEECOLUX

    3 Pages

  2. Epoxy Gel

    3 Pages

  3. Balsaplast

    2 Pages

  4. KARAAT

    2 Pages

  5. DUBBEL UV

    2 Pages