BoschRexroth Marex OSII - 4 Pages
Marex OS II stands for "Open System" and is
an advancement of Marex OS. Due to its high
grade of modularity, the remote control can be
adapted to all particularities of the propulsion
■ Adequate for each type of vessel
■ Flexible in the adaptation to the
■ Optional emergency control system
Engine characteristic lines for economic ope-
ration, overload control and adjustable delay
times for smooth and efficient gear shifting
are only a small extract of the functions the
Marex OS II provides.
The remote control's components are connected
by means of pre-confectioned cables. A serial
CAN-bus serves for communication purposes.
The CAN-bus ensures an extremely secure
control procedure. Information from the
safety system can be integrated into the control
■ Little wiring effort
■ Pre-confectioned electrical cables
■ Devices ready to connect
Operating safety - certification
All components correspond to the highest
demands of safety and fulfill the requirements
of the most important classification societies.
E. g. endurance test
During this test the control head is actuated
about one million times. Well-chosen materials
as well as first-class quality make sure that the
devices withstand this high grade of operation.
Vibration, high-voltage, temperature, salt mist,
EMC, inflammability, declination
Our products are
to the instructions of
Germanischer Lloyd, LR,
ABS, BV, Rina, Russian
Maritime Register, Polski
Register, Korean Register
P. 1Industrial Electric Drives Linear Motion and Service Mobile UûY |"^)t 11 Hydraulics I and Controls I Assembly Technologies...
P. 22 Marex OS II - The electronic control system for all types of vessels. In Hanover, Germany, Bosch Rexroth produce electrical...
P. 4Rexroth Bosch Group Bosch Rexroth AG Department Marine Technique Bartweg 13 D-30453 Hannover P.O. Box 91 07 62 D-30427 Hannover Phone...