MX412 Pump System - 28 Pages

Add to MyNauticExpo favorites
MX412 Pump System
  1. P. 1

  2. P. 2

  3. P. 3

  4. P. 4

  5. P. 5

  6. P. 6

  7. P. 7

  8. P. 8

  9. P. 9

  10. P. 10

  11. P. 20

Catalog excerpts

MX412 12:1 Pump Systems for Air Assist & Airless Finishing Patent 7,603,855 C€<g> We reserve the right to change the specifications without prior notice.

 Open the catalog to page 1

In this part sheet, the words WARNING, CAUTION and NOTE are used to emphasize important safety information as follows: Hazards or unsafe practices which could result in severe personal injury, death or substantial property damage. Hazards or unsafe practices which could result in minor personal injury, product or property damage. Important installation, operation or maintenance information. Read the following warnings before using this equipment. Read the Manual Before operating finishing equipment, read and understand all safety, operation and maintenance information provided in the operation...

 Open the catalog to page 2

High Pressure Can cause serious injury if equipment is installed or used incorrectly— Read, Understand, and observe all Warnings and Instructions in this Manual. Install, Operate or service this Equipment Only After All Instructions Are Clearly Understood. It is the responsibility of the employer to place this information into the hands of the operator. Hazards or unsafe practices which could result in severe personal injury, death or substantial property damage. Hazards or unsafe practices which could result in minor personal injury, product or property damage. AVOID STATIC SPARKING GENERAL WARNINGS 1....

 Open the catalog to page 3

EC Declaration of Conformity We: Finishing Brands, Ringwood Rd., Bournemouth, Dorset, BH11 9LH, UK As the manufacturer of the items listed below: Piston Pumps MX412    MX432 Declare, under our sole responsibility, that, the equipment to which this document relates is in conformity with the following standards or other normative documents: EN 13463-1:2009, EN 13463-5:2005, EN 982:1996 + A1:2008, EN 983:1996 + A1:2008 and EN 12621:2006 And thereby conform to the protection requirements of Council Directive 98/37/EC relating to Machinery Safety Directive and council Directive 94/9/EC relating to...

 Open the catalog to page 4

(Part numbers referenced are contained in MX412 Bare Pump Assembly Part Sheet: 77-2906.) GROUNDING THE BINKS PUMP To prevent static charging igniting the flammable spray material, the BINKS pump must be grounded before it is started up. A grounding cable is included with the pump. 1. Clamp the grounding cable to the terminal on the high pressure filter or the air motor. 2. Connect the other end of the grounding cable to a suitable grounding device (e.g. grounding bar). PREPARING TO START UP THE BINKS PUMP Proceed as follows: 1. Check that the solvent cup (0115-010059) is full to the level shown....

 Open the catalog to page 5

|gjlCAUTiON^_ When work is stopped, the safety lever of the gun must be locked. flows back into the tank through the high pressure filter, the high pressure ball valve and the return pipe. 6. Remove the spray tip from the gun and point the gun into the tank. Unlock the safety lever on the gun. Operate the gun trigger and close the high pressure ball valve (0114-019091). The spray material will now flow through the high pressure filter, the fluid hose and the gun, back into the tank. 7. Release the gun trigger and set the working pressure at the regulator. NOTE Before carrying out any coating work,...

 Open the catalog to page 6

MX412 CART MOUNTED SYSTEMS MX412 PL = PTFE / Leather PP = PTFE PU = PTFE / UHMW UC = U-Cups E = AA1600 Flat Tip    D = Air Control T ' SIPHON 0 = none S = 5 gallon T = 55 gallon HOSE 00 = none 25 = 25 ft / whip 50 = 50 ft / whip SYSTEM COMPONENT LIST ITEM NO.

 Open the catalog to page 7

MX412 WALL MOUNTED SYSTEMS MX412 PL = PTFE / Leather PP = PTFE PU = PTFE / UHMW UC = U-Cups E = AA1600 Flat Tip    D = Air Control T SIPHON 0 = none S = 5 gallon T = 55 gallon Mounting pattern SYSTEM COMPONENT LIST ITEM NO.

 Open the catalog to page 8

MX412 TRIPOD MOUNTED SYSTEMS SEALS PL = PTFE / Leather PP = PTFE PU = PTFE / UHMW UC = U-Cups SPRAY GUN 0 = none E = AA1600 Flat Tip F = AA1600 Twist Tip P = Airless 75 AIR CONTROL 0 = none D = Air Control SIPHON 0 = none S = 5 gallon T = 55 gallon SYSTEM COMPONENT LIST ITEM NO.

 Open the catalog to page 9

MX412 LITE TRIPOD MOUNTED SYSTEM MX412UC- SPRAY GUN AIR CONTROL MOUNTING E = AA1600 Flat Tip L = lite    T = tripod SIPHON    HOSE PARTS LIST

 Open the catalog to page 10

STAINLESS STEEL HIGH PRESSURE FILTER ASSEMBLIES 0115-010326 (100 MESH FILTER ELEMENT) 0115-010630 (200 MESH FILTER ELEMENT) SPECIFICATIONS Additional filter mesh sizes (sold separately): For 50 mesh order: 0110-009131 For 150 mesh order: 0010-009133

 Open the catalog to page 11

41-28272 MX LITE AIR CONTROL ASSEMBLYPARTS LIST ITEM NO.

 Open the catalog to page 12

SYSTEM ACCESSORIES 0115-010100 TRIPOD ASSEMBLY PARTS LIST When ordering, please specify Part No. ITEM    PART PARTS LIST When ordering, please specify Part No. ITEM    PART PARTS LIST When ordering, please specify Part No. ITEM    PART 0115-010381 55-GALLON SIPHON KIT PARTS LIST When ordering, please specify Part No. ITEM PART NO. NO.    DESCRIPTION    QTY. 0115-010256 CHECK VALVE ASSEMBLY PARTS LIST When ordering, please specify Part No. ITEM    PART * Parts are included in Repair Kits: 0115-010222 (FX4 w/PTFE & Leather) 0115-010224 (FX4 w/PTFE) 0115-010388 (FX4 w/PTFE & UHMW) 0115-010220 (FX4...

 Open the catalog to page 13

ACCESSORIES FOR YOUR MX412 PUMP FLUID FILTER (100 MESH) 0115-010326 AIR ASSIST SPRAY GUNS LUBRICATING OIL FOR FX4 FLUID PUMP 0114-009433 (Solvent Based Materials) 0114-014871 (Water Based Materials) FLUID FILTER (200 MESH) 0115-010630 0909-1600-HT0000 (AA1600 Gun with Twist Tip) Service Bulletin 77-2921 WARRANTY This product is covered by Binks’ 5 Year Limited Warranty. Binks Sales and Service: www.binks.com U.S.A./Canada Customer Service 195 Internationale Blvd. Glendale Heights, IL 60139 630-237-5000 Toll Free Customer Service and Technical Support 800-992-4657 Toll Free Fax 888-246-5732 77-2912R-10...

 Open the catalog to page 14

MX412 12:1 Sistemas de bomba para Acabado c/asistencia de aire y sin aire Patente 7,603,855 C€<£> Nos reservamos el derecho de modificar las especificaciones sin previo aviso. © BINKS 2013    ReemplazaHoja de piezas 77-2912R-9

 Open the catalog to page 15

En esta Hoja de piezas, las palabras ADVERTENCIA, PRECAUCIÓN y NOTA se emplean para enfatizar información de seguridad importante de la manera siguiente: Prácticas peligrosas o inseguras que pueden ocasionar lesiones personales graves, la muerte o daño substancial a la propiedad. Prácticas peligrosas o inseguras que pueden ocasionar lesiones personales leves, la muerte, daño al producto o a la propiedad. Información importante de instalación, operación o mantenimiento. Lea las siguientes advertencias antes de usar este equipo. Lea el Manual Antes de operar los equipos de acabado, lea y comprenda...

 Open the catalog to page 16

All Binks catalogs and brochures

  1. MX1212 Pump System

    24 Pages

    En
  2. Model 7 Spray Gun

    12 Pages

    En
  3. Trophy Siphon

    80 Pages

    En
  4. Trophy Gravity

    80 Pages

    En
  5. Trophy Pressure

    80 Pages

    En
  6. GEMS 240-5100

    16 Pages

    En
  7. MAG AA Automatic

    8 Pages

    En

Archived catalogs

  1. Trophy series

    10 Pages

    En