Air_FluidNozzleID_Guide - 2 Pages

Add to MyNauticExpo favorites
Air_FluidNozzleID_Guide

Catalog excerpts

J Air Nozzle Identification Guide AIR NOZZLE TYPE REMARKS 63P PE Low CFM Capacity, Medium to Narrow Fan Width 66S SE Low CFM Capacity, Siphon Nozzle Medium Viscosity Material An excellent "general purpose" nozzle, used with wide range of materials 14.3 High volume delivery nozzle, anti "fogging," wide fan width 15.5 use with high solids materials, very wide pattern High production nozzle 15.5 Used for vitreous enamels and other abrasive materials 18.2 Best air nozzle for adhesive applications 15.4 High production, high volume delivery nozzle 15 Used with high solids, vitreous enamels 16.4 An excellent "general purpose" siphon nozzle, 12.1 use with wide range of materials High Viscosity Materials TYPE REMARKS PE An excellent "general purpose" nozzle for heavier viscosities of materials. PE Used for Zinc rich and other abrasive coatings PE An excellent "general purpose" nozzle where a high volume and heavier viscosity materials are required PE An excellent "general purpose" siphon nozzle, wide pattern with higher fluid, delivery, used with wide range of materials TYPE REMARKS 50 PSI PATTERN PI Tungsten Carbide, Used with highly abrasive materials 6.8 11" PI Tungsten Carbide, Used with road marking materials 11.5 9" PI Primarily used for multi color applications 5.2 14" PI Primarily used for light text materials 6.8 11" PI Primarily used for multi color applications,light texture 9.5 19" PI SS, used with road marking materials on truck mount guns, water-based paint 11.5 9" PI SS, used with road marking materials on truck mount guns, water-based paint 10.5 11" PI Primarily used with push behind line stripers 5.75 8" Note: PE - Pressure External SE - Siphon External PI - Pressure Internal * For other Air nozzles see charts on page 20 Needle Assembly Nozzle Base with "Needle Assembly Fluid Nozzle Needle Assembly Spiral Fluid Nozzle Needle Valve *Veiling tDistressing

 Open the catalog to page 1

B Fluid Nozzle Identification Guide Flow Rates for Fluid Nozzles Pressure Feed Siphon Feed FLOW RATE Fluid Nozzle Orifice Size ORIFICE SIZE ORIFICE SIZE ORIFICE SIZE ORIFICE SIZE t Stainless steel with tungsten carbide insert.

 Open the catalog to page 2

All Binks catalogs and brochures

  1. Trophy Siphon

    80 Pages

  2. Trophy Gravity

    80 Pages

  3. Trophy Pressure

    80 Pages

  4. GEMS 240-5100

    16 Pages

Archived catalogs

  1. Trophy series

    10 Pages