Catalogue Belliure 48MY
www.belliure.com
print switch display
Page / 5
Belliure - 4987, 57689, 139357, 4472, 60700, 62825, 57841, 2855, 63177
/ 5
See other catalogues for Belliure
Text version of the page
CONSTRUCTION DETAILS:

BELLIURE – 48 M Y

STANDARD SPECIFICATIONS

MAIN CHARACTERISTICS: * Length over all 16.25 m* Hull Length 14.75 m* Maximum beam 4.60 m* Maximum draught 1.75 m * Displacement 22.000 kg * Propulsion 2 x 330 h.p. * Generator for boat 5.5 kW. * Fuel capacity 3.500 litres* Water capacity 1.000 litres* Maximum speed* (Standard Engines) 15 – 17 knots * Cruising speed*(Standard Engines) 12 – 14 knots * Maximum speed*(Opt. Engines 435h.p.) 19 – 21 knots* Cruising speed*(Opt. Engines 435 h.p.) 16 – 19 knots * Accommodation 3 double cabins * Designed by VICENTE BELLIURE * Design category : B* Option: Design category A withadapted specifications * Option: U.S. version with adaptedcharacteristics (voltage and others)*the installation of marine equipment like airconditioning, dinghy etc. may changethese performancesDESIGN PHILOSOPHY The philosophy of the BELLIURE 48 is a well-equipped and extremely strong andcomfortable semi-displacement cruiser. She displays the characteristic aesthetics of this type of boat for boat, with features that reflect the classic elegance and exquisite finishes of BELLIURE yachts.With a sufficient cruising speed, she has agenerous operating radius, which allows forlong crossings and extended voyages withoutthe need to enter port. ACCOMODATION: Hull: Mould-built in a single piece with monolithic polyester laminate reinforced withfibreglass using vinilester boat resins in first coatings. It has longitudinal and transversal reinforcements in high-density foam sandwich, which are laminated and integrated into the hull to form an extremelyhardwearing and suitably flexible structure.The bulkheads are made of marine phenolic plywood marine boards, glued together into a single piece and laminated to the hull using FRP. Inthis way they are incorporated into the hull,forming part of its structure. The outer part ofthe hull is finished with gel-coat. The yacht has four totally separateaccommodation areas: A large wheel boat house, with two opening doors with pantograph, where the navigation and equipment controls can be found. Thenavigation area is also situated here, with a large boat chart table for boats and enough space to be able to install all the navigation aids considerednecessary. Stairs provide access to theflybridge. Aft of the bridge there is a fully equipped galley, and behind this, the saloon with a sofa, a table and a sideboard facing the area where the television, the fridge and otherequipment will be integrated.From the saloon there is access to the cabin area, which comprises one cabin with a double bed for the owner, with a private bathroom. There is also access to the two guest cabins, with twin beds in each, and ashared bathroom.On the deck, there is a broad area aft of the saloon, lined with teak, with access on the same level to the engine for boats room and the after lazarette. Along the sides and following the lines of the bridge there are two passagewayslined with teak, which provide access to thebow area with a sufficiently high bulwark finished with a wooden rough tree rail, the handrail on this finished in stainless steel. On the flybridge, there is a large sundeck,incorporating an exterior steering area withlinkage and control boat panels installed in a module into which the necessary navigation aid equipment can be incorporated. In the same module, there is a seat for boats for the helmsman, and separate from this, an openU-shaped sofa module for companions onboard. V.BELLIURE C.N.S.L. reserves the right to modify or substitute any part of these specificationswithout prior notice. Valid until end of 2008. Calpe 01/08
NauticExpo's Virtual Library: PDF Catalogues | Documentation | Boating Brochures | Manuals | Marine directory | Specifications | Characteristics
Search Go
page 1 p.1
page 2 p.2
page 3 p.3
page 4 p.4
page 5 p.5