| Approved drinking water pipes. Epoxy painted marine aluminium holding tank. Outlets of showers and marine sinks connected to the holding tank. Electric pump for boat with automatic position to empty the holding tank and outlet through hull located at the stern above the waterline next to bilge drainage. WASTE WATER PLUMBING SYSTEM: 2 Aluminium tanks for boats, epoxy painted, one in each bathroom with sea and deck discharge systems. SALT WATER PLUMBING SYSTEM: 2 bronze hull outlets below the waterline providing easy access, for inlet of each engine for boats refrigeration system and 2 bronze hull outlets for the W.C. inlet. 1/4 turn ball valve in each hull outlet. DIESEL PLUMBING SYSTEM: Balanced tanks by means of standardised hoses and seal valve. Each engine is equipped with a water- separating decanting filter. Fuel lines in copper piping. Filling caps located in passageways on deck. and clear pipe sight gauge. Emergency system to close diesel pipes from ELECTRICAL SYSTEMS: 3 battery banks (1 auxiliary with 2 batteries 12V 220Ah each, 2 for engines 12V 185Ah each, 1 for the marine generator 12 V 185 Ah). Laminated box for battery container. Selector switch for reading the different battery units. Magnetothermal instruments with LED for all circuits. 220 V. port-off-generator selector switch. Differentials for 220 V. |