Sailman - 16 Pages

  1. P. 1

  2. P. 2

  3. P. 3

  4. P. 4

  5. P. 5

  6. P. 6

  7. P. 7

  8. P. 8

  9. P. 9

  10. P. 10

Catalogue excerpts

Technical Innovation and Service - The Fabric of Our Business

 Open the catalogue to page 1

Introduction & Contents The principle behind Bainbridge International’s Sailman™ system is simple. A range of trackless full batten systems incorporating slides, boxes and battens from one supplier. Bainbridge International has one objective; to provide highly engineered, innovative, effective and good value, fully integrated batten systems to suit most yachts from 22ft to 50ft (6.7 to 15.2 metres). No other organisation has our knowledge and experience of sailmaking, sail hardware and control systems. This combination of skills is your guarantee of efficiency, quality and reliability. Contents...

 Open the catalogue to page 2

Sailman Full Batten Systems Fully integrated Batten Systems • Precision moulded plastic slides • Solid hinge system with ‘lay-flat’ rotation • Flat battens with integral tension adjuster A range of fully integrated batten systems for boats from 22 to 50 feet (6.7 to 15.2 metres). • Ideal for composite spars • Used with wing masts • Suits gates that are proud of sail track • Low friction sliders with stainless reinforced I-beam • Cast stainless hinge with ‘lay-flat’ rotation • Battens 30mm x 12.7mm or 16mm round • Low friction sliders with stainless reinforced I-beam • Cast stainless hinge with...

 Open the catalogue to page 3

Sailman Full Batten Systems U01540 Series 25 Luff Box: Sailman Full Batten Systems Tough injection moulded fibre reinforced construction. Integrated tension adjustment system with friction lock. Accommodates battens up to 30mm x 5.2mm including 30CT052. Top plate design allows simple batten fitting and removal. Moulded M10 thread. U01531 / U01530 Series 35 Luff Box - U01531 Adjustable / U01530 Non-Adjustable: • Tough injection moulded fibre reinforced construction. • Concealed M10 nut for extra strength compared to threaded plastic designs. • Optional batten tension adjustment with metal drive...

 Open the catalogue to page 4

Sailman Full Batten Systems Fits with Full Length Batten, Part Number: Full Length Battens (actual size): Sailman Full Batten Systems Website: www.bainbridgeint.com

 Open the catalogue to page 5

Sailman 3000 For boats up to 35 feet (10.5m) approx. Sailman 3000 is a compact integrated full batten system for boats up to 35ft. The system comprises seven profiles of slide and a durable slide linkage that is compatible with Series 25 and Series 35 batten boxes. Sailman Full Batten Systems Sailman 3000 is compatible with most modern internal mast tracks and despite being designed to be affordable, still includes many detailed design features and advanced quality materials. Cast stainless M10 connector arm Glass fibre reinforced PTFE impregnated slide Screw tension adjuster with friction lock Removable...

 Open the catalogue to page 6

Sailman 3000 For boats up to 35 feet (10.5m) approx. Please note: Images are for illustration purposes only and are not actual size. Slides should be a snug fit and bear on aft face of mast. A108 Low friction slide 19mm width A109 Low friction slide 22.2mm width Low friction slide 15.2mm Selden ‘E’ Series 15.2mm wide 3 Long reach screw-on Series 35 Heavy Duty Luff Box Adjustable U01535 A116 Low friction slide 7.4mm diameter 10R A117 Low friction slide 8.4mm diameter • Seven profiles to fit most modern spars. • Precision moulded from glass fibre reinforced plastic with a PTFE impregnation. • Integral...

 Open the catalogue to page 7

Sailman 3500 For boats up to 35 feet (10.5m) approx. The Sailman 3500 system has been specifically designed to fit a full batten sail on three of the most difficult types of spars: • Alloy spars with sail feeding gates that are proud of the aft face of the mast. Sailman Full Batten Systems • Composite spars. • Alloy and composite wing masts. Optional integral batten tension adjuster Cast stainless M10 connector arm Glass fibre reinforced PTFE impregnated slide Compression pads transfer loads directly to mast Range of 4 different slug and flat slide designs Cast connection allows exceptional rotation Solid...

 Open the catalogue to page 8

For boats up to 35 feet (10.5m) approx. Please note: Images are for illustration purposes only and are not actual size. Series 25 Luff Box U01540 Series 35 Heavy Duty Luff Box Adjustable U01535 9.0mm width 3.4mm waist Part No. Batten Slides: • Sailman 3500 slides are designed to run inside the mast groove and unlike Sailman 3000 and 4000 slides, do not bear on the aft face of the mast. This allows them to run past feeding gates and to slide in very narrow grooves on composite wing masts. • To prevent wear on composite spars the slides have no exposed metal parts. • The smallest slug version has...

 Open the catalogue to page 9

Sailman 4000 For boats up to 43 feet (13m) approx. Sailman 4000 is a premium trackless full batten system for boats up to 43ft. The system comprises seven profiles of slides that feature a durable hinge system and stainless steel reinforced slugs. All slides are compatible with Series 35 and Series 55 batten boxes. Sailman 4000 has been designed as a premium system that, through careful design and detailed engineering, Sailman Full Batten Systems Glass fibre reinforced PTFE impregnated slide delivers excellent performance and strength without the complication and cost of fitting an external track. Cast...

 Open the catalogue to page 10

Sailman 4000 Please note: Images are for illustration purposes only and are not actual size. For boats up to 43 feet (13m) approx. Series 35 Heavy Duty Luff Box Adjustable U01535 • Seven profiles to fit most modern spars. • Precision moulded from glass fibre reinforced plastic with PTFE impregnation. • Durable stainless steel hinge system and connecting arm. • Low friction compression pads transfer load directly onto aft face of spar. • Composite slugs for extra strength. • Moulded cotton reels for web on attachment in intermediate positions. • Can also be webbed to standard headboards as light...

 Open the catalogue to page 11

Sailman 4000HD For boats from 30 (9m) to 50 feet (15m) approx. New Sailman 4000HD provides a super strong step up from the standard 4000 system, allowing a simple in mast solution for yachts up to 50 feet, which can be retro-fitted to many modern mast profiles. The fact that it is an in mast system makes it an obvious choice to save time and money when compared to costly and difficult to fit track systems. Sailman Full Batten Systems Cast stainless M10 connector arm Optional integral batten tension adjuster Glass fibre reinforced PTFE impregnated slide Fully articulating, stainless steel joints Concealed...

 Open the catalogue to page 12

All Bainbridge international catalogues and brochures

  1. MP

    2 Pages

    En
  2. AIRX

    2 Pages

    En
  3. Sailcloth Update

    44 Pages

    En
  4. CL

    6 Pages

    En
  5. DIAX

    6 Pages

    En

Archived catalogues