EQUATOR MSR36240
12Pages

Operating Instructions

compact ultra-thin underwater light with built-in driver is designed to use the latest LED lighting The surface-mount designed casing enable very simple installation on the stern and both sides of the hull without making any bigger holes through the hull under waterline. All the models are available in aluminium bronze or stainless steel casings. The lighting is available in white, blue, green or RGB colors with 36 power LEDs. The multi-color RGB version allows changing of the color of lighting manually or automatically through the complete rainbow The most advanced electronic design with...

High-grade polycarbonate glass optical window. (2) Underwater Eight casing Aluminium bronze or stainless steel casing with fixing holes and cable gland. The 4-pole multi-core cable to connect the 12-24Vdc power supply and optional remote control or The fixing screws to fix the underwater light on the hull.

The underwater light kit consists of the following components: . Underwater Light EQUATOR MSR36240 • 3 X fixing screw M6x80 with nut M6 and washer • Operating Instructions with Declaration of Conformity and Warranty conditions The EQUATOR MSR36240 has to be installed on a flat surface on the stern or both sides of the hull Do not try to install the underwater light while the vessel is in the water. When the installation is finished briefly test the underwater light prior to launching the vessel. The installation have to be realized by a qualified personnel. • Avoid using the underwater...

The cable with gland has to be inserted through the hole from outside of the hull. The underwater light has to be fixed with three screws M6x80 with nuts M6 and washers. ♦ All the stainless steel fixing screws (M6x80) it Is highly recommended to be sealed in the contact with underwater light casing by optional TEF-GEL™ waterproof paste (not Included) to prevent galvanic corrosion. • To install the underwater light on the steel hull it is highly recommended to use the optional isolation board (not included) between the hull and underwater light casing to prevent galvanic corrosion. • Do not...

To control the mode of lighting the simple key-switch (not included) has to be used and connected to the CONTROL wires by the 2-pole signal cable (not included). Single-color white (W), blue (B) or green IG) models Remote control can be used to turn-on and turn-off the underwater light and to control the luminosity. Remote control has to be used to turn-on and turn-off the underwater light and to control the mode of The multi-color underwater light can be controlled by using the key-switch. When the light is turned-off the color or mode of lighting can be changed sequentially by pressing...

TECHNICAL SPECIFICATIONS Power supply Lens angle Optical window Luminous flux White color temperature Operating temperature High-grade polycarbonate glass Aluminium bronze (AB2) or stainless steel (316L) Design and specifications subject to change without notice.

1. The equipment manufactured by ASTEL d.o.o. is warranted to be free from defects in workmanship and materials under normal use and service. 2. This Warranty is in effect for of two years from the date of purchase by the user. Proof of purchase must be included, to establish that it is inside the warranty period. 3. This Warranty is transferable and covers the product for the specified time period. 4. In case any part od the equipment proves to be defective, other than those parts excluded in paragraph 5 below, the owner should do the following: (a) prepare a detailed written statement of...

Manufacturer's Name: ASTEL, Podjetje za projektiranje, proizvodnjo in Manufacturer's Address: declares that Ihe products Item, Product Name and Model Number: 1. Underwater Light EQUATOR MSR36240 conform to the following Product Specifications: Supplementary Information: The products herewith comply with the requirements of the following Directives and carry the CE- marking accordingly:

ASTEL d.o.o., Dutovlje 138, 6221 Dutovlje, Slovenia